ISO TC 164 , پکیج استانداردهای تست مکانیکال فلزات

دانلود استانداردهای BS EN ISO

ISO TC 164 : Mechanical testing of metals

پکیج استانداردهای ایزو برای انواع تست مکانیکی فلزات (مجموعه استانداردهای کمیته فنی ISO TC 164)

ISO TC 164 یکی از کمیته های فنی ایزو و با موضوع استانداردهای انواع تست مکانیکی فلزات می باشد که شامل 4 زیر کمیته فرعی به شرح زیر می باشد.

  • زیر کمیته شماره 1: انواع تست های تک محوری
  • زیرکمیته شماره 2: تستهای شکل پذیری فلزات
  • زیرکمیته شماره 3: تست های سختی فلزات
  • زیرکمیته شماره 4: انواع تست های شکست، استحکام و تنش برای فلزات

لیست استانداردها:

ISO TC 164 /DIRECT

  1. ISO 23718: 2007 Metallic materials — Mechanical testing — Vocabulary

ISO TC 164 /SC1 : Uniaxial testing

  1. ISO/TTA 5:2007 Code of practice for creep/fatigue testing of cracked components
  2. ISO 204: 2018 Metallic materials — Uniaxial creep testing in tension — Method of test
  3. ISO 376: 2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
  4. ISO 6892-1: 2019 Metallic materials — Tensile testing — Part 1: Method of test at room temperature
  5. ISO 6892-2: 2018 Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
  6. ISO 6892-3:2015 Metallic materials — Tensile testing — Part 3: Method of test at low temperature
  7. ISO 6892-4:2015 Metallic materials — Tensile testing — Part 4: Method of test in liquid helium
  8. ISO 7500-1: 2018 Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system
  9. ISO 7500-2: 2006 Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines- Verification of the applied force
  10. ISO 9513: 2012 + COR 1: 2013  Metallic materials — Calibration of extensometer systems used in uniaxial testing
  11. ISO 26203-1: 2018 Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems
  12. ISO 26203-2: 2011 Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems

ISO TC 164 /SC2 : Ductility testing

  1. ISO 7438: 2020 Metallic materials — Bend test
  2. ISO 7799: 1985 Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test
  3. ISO 7800:2012 Metallic materials — Wire — Simple torsion test
  4. ISO 7801: 1984 Metallic materials — Wire — Reverse bend test
  5. ISO 7802: 2013 Metallic materials — Wire — Wrapping test
  6. ISO 8491: 1998 Metallic materials — Tube (in full section) — Bend test
  7. ISO 8492: 2013 Metallic materials — Tube — Flattening test
  8. ISO 8493: 1998 Metallic materials — Tube — Drift-expanding test
  9. ISO 8494: 2013 Metallic materials — Tube — Flanging test
  10. ISO 8495: 2013 Metallic materials — Tube — Ring-expanding test
  11. ISO 8496: 2013 Metallic materials — Tube — Ring tensile test
  12. ISO 9649: 2016 Metallic materials — Wire — Reverse torsion test
  13. ISO 10113: 2020 Metallic materials — Sheet and strip — Determination of plastic strain ratio
  14. ISO 10275: 2020 Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent
  15. ISO 11531: 2022 Metallic materials — Earing test
  16. ISO 12004-1: 2020 Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop
  17. ISO 12004-2: 2021 Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory
  18. ISO 13314: 2011 Mechanical testing of metals — Ductility testing — Compression test for porous and cellular metals
  19. ISO 15363: 2017 Metallic materials — Tube ring hydraulic pressure test
  20. ISO 16630: 2017 Metallic materials — Sheet and strip — Hole expanding test
  21. ISO 16808: 2022 Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
  22. ISO 16842: 2021 Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
  23. ISO 17340: 2020 Metallic materials — Ductility testing — High speed compression test for porous and cellular metals
  24. ISO 18338:2021 Metallic materials — Torsion test at ambient temperature
  25. ISO 20032: 2013 Method for evaluation of tensile properties of metallic superplastic materials
  26. ISO 20482: 2013 Metallic materials — Sheet and strip — Erichsen cupping test
  27. ISO 24213: 2017 Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending

ISO TC 164 /SC3 : Hardness testing

  1. ISO 4516:2002 Metallic and other inorganic coatings — Vickers and Knoop microhardness tests
  2. ISO 4545-1: 2017 Metallic materials — Knoop hardness test — Part 1: Test method
  3. ISO 4545-2: 2017 Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines
  4. ISO 4545-3: 2017 Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks
  5. ISO 4545-4: 2017 Metallic materials — Knoop hardness test — Part 4: Table of hardness values
  6. ISO 6506-1: 2014 Metallic materials — Brinell hardness test — Part 1: Test method
  7. ISO 6506-2: 2017 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
  8. ISO 6506-3: 2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
  9. ISO 6506-4: 2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values
  10. ISO 6507-1: 2018 Metallic materials — Vickers hardness test — Part 1: Test method
  11. ISO 6507-2: 2018 Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines
  12. ISO 6507-3: 2018 Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks
  13. ISO 6507-4: 2018 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values
  14. ISO 6508-1: 2016 Metallic materials — Rockwell hardness test — Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T
  15. ISO 6508-2: 2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
  16. ISO 6508-3: 2015 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
  17. ISO 14577-1: 2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method
  18. ISO 14577-2: 2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
  19. ISO 14577-3: 2015 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
  20. ISO 14577-4: 2016 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings
  21. ISO 16859-1:2015 Metallic materials — Leeb hardness test — Part 1: Test method
  22. ISO 16859-2:2015 Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices
  23. ISO 16859-3:2015 Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks
  24. ISO 18265: 2013 Metallic materials — Conversion of hardness values
  25. ISO TR 29381: 2008 Metallic materials — Measurement of mechanical properties by an instrumented indentation test — Indentation tensile properties

ISO TC 164 /SC4 : Fatigue, fracture and toughness testing

  1. ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
  2. ISO 148-2:2016 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
  3. ISO 148-3:2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
  4. ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
  5. ISO 1143:2021 Metallic materials — Rotating bar bending fatigue testing
  6. ISO 1352:2011 Metallic materials — Torque-controlled fatigue testing
  7. ISO 3785:2023    Metallic materials — Designation of test specimen axes in relation to product texture
  8. ISO 4965-1:2012 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
  9. ISO 4965-2:2012 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
  10. ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
  11. ISO 12107:2012 Metallic materials — Fatigue testing — Statistical planning and analysis of data
  12. ISO 12108:2018 Metallic materials — Fatigue testing — Fatigue crack growth method
  13. ISO 12110-1:2013 Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 1: General principles, test method and reporting requirements
  14. ISO 12110-2:2013 Metallic materials — Fatigue testing — Variable amplitude fatigue testing — Part 2: Cycle counting and related data reduction methods
  15. ISO 12111:2011 Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
  16. ISO 12135:2021 Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
  17. ISO 14556:2023   Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
  18. ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
  19. ISO 20064:2019 Metallic materials — Steel — Method of test for the determination of brittle crack arrest toughness, Kca
  20. ISO 22889:2013 Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint
  21. ISO 23788:2012   Metallic materials — Verification of the alignment of fatigue testing machines
  22. ISO 26843:2015 Metallic materials — Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
  23. ISO 27306:2016 Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
مشخصات فایل
مجموعه استانداردهاASME پکیج استانداردهای مدیریت کیفیت

دیدگاهتان را بنویسید

دکمه بازگشت به بالا