EU-017-1 , استانداردهای آنالیز شیمیایی فولاد

ISO TC 17-1 + CEN TC 459-2 : Methods of determination of chemical composition

دانلود پکیج استانداردهای اروپایی ISO + EN + BSI برای آنالیز شیمیایی آهن و فولاد (مجموعه استانداردهای کمیته فنی ISO TC 17/SC1 و  CEN TC 459/SC2)

لیست استانداردهای پکیج EU-17-1 :

بخش اول: استانداردهای ایزو

1. ISO 439 __ 2020 SCAN Steel and cast iron — Determination of silicon content — Gravimetric method
2. ISO 629 __ 1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
3. ISO 671 __ 1982 Steel and cast iron — Determination of sulphur content — Combustion titrimetric method
4. ISO 1069798 __ 2018 Steel and cast iron — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 1: Silicon contents between 0,05 % and 1,0 %
5. ISO 1069829 __ 2016 Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 %
6. ISO 4934 __ 2003 Steel and iron — Determination of sulfur content — Gravimetric method
7. ISO 4935 __ 1989 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace
8. ISO 4937 __ 1986 Steel and iron — Determination of chromium content — Potentiometric or visual titration method
9. ISO 4938 __ 2016 Steel and iron — Determination of nickel content — Gravimetric or titrimetric method
10. ISO 4939 __ 2016 Steel — Determination of nickel — Dimethylglyoxime spectrophotometric method
11. ISO 4940 __ 1985 Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method
12. ISO 4941 __ 1994 Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method
13. ISO 4942 __ 2016 Steels and irons — Determination of vanadium content — N-BPHA spectrophotometric method
14. ISO 4943 __ 2022 Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method
15. ISO 4945 __ 2018 Steel — Determination of nitrogen — Spectrophotometric method
16. ISO 4946 __ 2016 Steel and cast iron — Determination of copper — 2,2′-Biquinoline spectrophotometric method
17. ISO 4947 __ 1986 Steel and cast iron — Determination of vanadium content — Potentiometric titration method
18. ISO 9441 __ 1988 Steel — Determination of niobium content — PAR spectrophotometric method
19. ISO 9556 __ 1989 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
20. ISO 9647 __ 1989 SCAN Steel — Determination of vanadium content — Flame atomic absorption spectrometric method (FAAS)
21. ISO 9658 __ 1990 Steel — Determination of aluminium content — Flame atomic absorption spectrometric method
22. ISO 9769 __ 2018 Steel and iron — Review of available methods of analysis
23. ISO 10138 __ 1991 Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method
24. ISO 10153 __ 1997 Steel — Determination of boron content — Curcumin spectrophotometric method
25. ISO 10278 __ 1995 Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method
26. ISO 10280 __ 1991 Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method
27. ISO 10697-1 __ 1992 Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 1: Determination of acid-soluble calcium content
28. ISO 10697-2 __ 1994 Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 2: Determination of total calcium content
29. ISO 10698 __ 1994 Steel — Determination of antimony content — Electrothermal atomic absorption spectrometric method
30. ISO 10700 __ 1994 Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method
31. ISO 10701 __ 1994 Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method
32. ISO 10702 __ 1993 Steel and iron — Determination of nitrogen content — Titrimetric method after distillation
33. ISO 10714 __ 1992 Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method
34. ISO 10719 __ 2016 Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace
35. ISO 10720 __ 1997 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas
36. ISO 11652 __ 1997 Steel and iron — Determination of cobalt content — Flame atomic absorption spectrometric method
37. ISO 11653 __ 1997 Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange
38. ISO 13899-1 __ 2004 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content
39. ISO 13899-2 __ 2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content
40. ISO 13899-3 __ 2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content
41. ISO 13900 __ 1997 Steel — Determination of boron content — Curcumin spectrophotometric method after distillation
42. ISO 13902 __ 1997 Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace
43. ISO 13933 __ 2014 Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emission spectrometric method
44. ISO 14284 __ 2022 SCAN Steel and iron — Sampling and preparation of samples for the determination of chemical composition
45. ISO 15349-2 __ 2021 Unalloyed steel — Determination of low carbon content — Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
46. ISO 15350 __ 2000 Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method)
47. ISO 15351 __ 1999 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method)
48. ISO 15353 __ 2001 Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN)
49. ISO 15355 __ 1999 Steel and iron — Determination of chromium content — Indirect titration method
50. ISO 16918-1 __ 2009 Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth
51. ISO 17053 __ 2005 Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas
52. ISO 17054 __ 2010 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
53. ISO 17055 __ 2002 Steel — Determination of silicon content — Inductively coupled plasma atomic emission spectrometric method
54. ISO 17058 __ 2004 Steel and iron — Determination of arsenic content — Spectrophotometric method
55. ISO 17925 __ 2004 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
56. ISO 18632 __ 2018 Alloyed steels — Determination of manganese — Potentiometric or visual titration method
57. ISO 19272 __ 2015 Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu – Glow discharge optical emission spectrometry (routine method)
58. ISO 21074 __ 2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel

بخش دوم: استانداردهای EN

1. CEN/TR 10261 __ 2023 __ Iron and steel – European standards for the determination of chemical composition
2. CEN/TR 10317 __ 2014 __ European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
3. CEN/TR 10345 __ 2013 __ Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
4. CEN/TR 10350 __ 2013 __ Analysis of steels and irons – Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
5. CEN/TR 10353 __ 2011 __ Chemical analysis of ferrous materials – Analysis of ferro-silicon – Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
6. CEN/TR 10354 __ 2011 __ Chemical analysis of ferrous materials – Analysis of ferro-silicon – Determination of Si and Al by X-ray fluorescence spectrometry
7. CEN/TR 10362 __ 2014 __ Chemical analysis of ferrous materials – Determination of selenium in steels – Electrothermal atomic absorption spectrometric method
8. CEN/TR 10364 __ 2018 __ Steels and cast irons – Determination of substances listed in the directives 2011/65/EU (RoHS) and 2000/53/EC (ELV) – Limitations
9. CEN/TR 10367 __ 2019 __ Alloyed steels – Determination of chromium content – Inductively coupled plasma optical emission spectrometric method
10. CR 10299 __ 1998 __ Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry
11. CR 10320 __ 2004 __ Optical emission analysis of low alloy steels (routine method) – Method for determination of C, Si, S, P, Mn, Cr, Ni and Cu
12. EN 10071 __ 2012 __ Chemical analysis of ferrous materials – Determination of manganese in steels and irons – Electrometric titration method
13. EN 10136 __ 2019 __ Steels and cast irons – Determination of nickel content – Flame atomic absorption spectrometric method (FAAS)
14. EN 10177 __ 2019 __ Steels – Determination of calcium content – Flame atomic absorption spectrometric method (FAAS)
15. EN 10178 __ 1989 __ Chemical analysis of ferrous materials – Determination of niobium in steels – Spectrophotometric method
16. EN 10179 __ 1989 __ Chemical analysis of ferrous materials – Determination of nitrogen (trace mounts) in steel – Spectrophotometric method
17. EN 10181 __ 2019 __ Steels – Determination of lead content – Flame atomic absorption spectrometric method (FAAS)
18. EN 10184 __ 2006 __ Chemical analysis of ferrous materials – Determination of phosphorus in non-alloyed steels and irons – Molybdenum blue spectrophotometric method
19. EN 10188 __ 1989 __ Chemical analysis of ferrous materials – Determination of chromium in steels and irons – Flame atomic absorption spectrometric method
20. EN 10200 __ 2012 __ Chemical analysis of ferrous materials – Determination of boron in steels – Spectrophotometric method
21. EN 10211 __ 2013 __ Chemical analysis of ferrous materials – Determination of titanium in steels and cast irons – Flame atomic absorption spectrometric method
22. EN 10212 __ 1995 __ Chemical analysis of ferrous materials – Determination of arsenic in steel and iron – Spectrophotometric method
23. EN 10276-1 __ 2000 __ Chemical analysis of ferrous materials – Determination of oxygen in steel and iron – Part 1: Sampling and preparation of steel samples for oxygen determination
24. EN 10276-2 __ 2003 __ Chemical analysis of ferrous materials – Determination of oxygen content in steel and iron – Part 2: Infrared method after fusion under inert gas
25. EN 10315 __ 2006 __ Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a near by technique
26. EN 10318 __ 2005 __ Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings – Routine method
27. EN 10351 __ 2011 __ Chemical analysis of ferrous materials – Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels – Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
28. EN 10355 __ 2013 __ Chemical analysis of ferrous materials – Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels – Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method]
29. EN 10361 __ 2015 __ Alloyed steels – Determination of nickel content – Inductively coupled plasma optical emission spectrometric method
30. EN 24159 __ 1989+AC1-1989 __ Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method (ISO 4159:1978, ed. 1)