ISO TC 45-01 , شلنگ های لاستیکی و پلاستیکی

ISO TC 45-01 : Rubber and plastics hoses and hose assemblies

 

لیست استانداردهای این مجموعه:

  1.  ISO 1307:2006 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
  2.  ISO 1401:2016 Rubber hoses for agricultural spraying
  3.  ISO 1402:2021 Rubber and plastics hoses and hose assemblies — Hydrostatic testing
  4.  ISO 1403:2019 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification
  5.  ISO 1436:2020 Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
  6.  ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service — Specification
  7.  ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
  8.  ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification
  9.  ISO 2928:2021 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification
  10.  ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
  11.  ISO 3861:2021 Rubber hoses and hose assemblies for sand and grit blasting — Specification
  12.  ISO 3862:2020 Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
  13.  ISO 3949:2020 Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
  14.  ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification
  15.  ISO 4023:2009 Rubber hoses and hose assemblies for steam — Test methods
  16.  ISO 4079:2020 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification
  17.  ISO 4080:2009 Rubber and plastics hoses and hose assemblies — Determination of permeability to gas
  18.  ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification
  19.  ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge — Specification
  20.  ISO 4642-1:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems
  21.  ISO 4642-2:2015 Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
  22.  ISO 4671:2007 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
  23.  ISO 5771:2008 Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification
  24.  ISO 5774:2016 Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
  25.  ISO 6134:2017 Rubber hoses and hose assemblies for saturated steam — Specification
  26.  ISO 6224:2011 Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification
  27.  ISO 6802:2018 Rubber or plastics hoses and hose assemblies — Hydraulic impulse test with flexing
  28.  ISO 6803:2017 Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing
  29.  ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification
  30.  ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification
  31.  ISO 6807:2003 Rubber hoses and hose assemblies for rotary drilling and vibration applications — Specification
  32.  ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
  33.  ISO 7233:2016 Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum
  34.  ISO 7326:2016 Rubber and plastics hoses — Assessment of ozone resistance under static conditions
  35.  ISO 7662:1988 Rubber and plastics hoses — Determination of abrasion of lining
  36.  ISO 7751:2016 Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure
  37.  ISO 8028:2017 Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification
  38.  ISO 8029:2014 Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification
  39.  ISO 8030:2014 Rubber and plastics hoses — Method of test for flammability
  40.  ISO 8031:2020 Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
  41.  ISO 8032:1997 Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (half-omega test)
  42.  ISO 8033:2016 Rubber and plastics hoses — Determination of adhesion between components
  43.  ISO 8066-2:2001 Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 2: Refrigerant 134a
  44.  ISO 8308:2015 Rubber and plastics hoses and tubing — Determination of transmission of liquids through hose and tubing walls
  45.  ISO 8330:2014 Rubber and plastics hoses and hose assemblies — Vocabulary
  46.  ISO 8331:2016 Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance
  47.  ISO 10619-1:2017 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 1: Bending tests at ambient temperature
  48.  ISO 10619-2:2021 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 2: Bending tests at sub-ambient temperatures
  49.  ISO 10619-3:2011 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
  50.  ISO 10960:2017 Rubber and plastics hoses — Assessment of ozone resistance under dynamic conditions
  51.  ISO 11237:2017 Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
  52.  ISO 11424:2017 Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
  53.  ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems — Specification
  54.  ISO 13774:1998 Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability
  55.  ISO 13775-1:2015 Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
  56.  ISO 13775-2:2016 Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
  57.  ISO 14557:2020 Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies
  58.  ISO 16301:2017 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification
  59.  ISO/TR 17784:2003 Rubber and plastics hoses and hose assemblies — Guide for use by purchasers, assemblers, installers and operating personnel
  60.  ISO 18752:2014 Rubber hoses and hose assemblies — Wire- or textile-reinforced single-pressure types for hydraulic applications — Specification
  61.  ISO 19013-1:2019 Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels
  62.  ISO 19013-2:2016 Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 2: Gasoline fuels
  63.  ISO 23297:2017 Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification
  64.  ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification
  65.  ISO 28017:2018 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications — Specification
  66.  ISO 30013:2011 Rubber and plastics hoses — Methods of exposure to laboratory light sources — Determination of changes in colour, appearance and other physical properties
مشخصات فایل
امتیاز دهید

دیدگاهتان را بنویسید