ISO TC 156 , مجموعه استانداردهای خوردگی فلزات

ISO TC-156 (Corrosion of metals and alloys)

دانلود آخرین ویرایشهای مجموعه استانداردهای خوردگی فلزات و حفاظت از خوردگی ، از سری استانداردهای ایزو

لیست کامل استانداردهای این مجموعه :

 ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements
ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
ISO 7539-1:2012 Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
ISO 7539-2:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
ISO 7539-3:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
ISO 7539-4:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
ISO 7539-5:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
ISO 7539-6:2018 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
ISO 7539-7:2005 Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
ISO 7539-8:2000 Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
ISO 7539-9:2003 Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
ISO 7539-10:2013 Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
ISO 7539-11:2013 Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
ISO 8044:2020 Corrosion of metals and alloys — Vocabulary
ISO 8407:2020 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
ISO 8565:2011 Metals and alloys — Atmospheric corrosion testing — General requirements
ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
ISO 9225:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 9226:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 9227:2022 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 9400:1990 Nickel-based alloys — Determination of resistance to intergranular corrosion
ISO 9591:2004 Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 10270:2022 Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
ISO 11130:2017 Corrosion of metals and alloys — Alternate immersion test in salt solution
ISO 11303:2002 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
ISO 11306:1998 Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
ISO 11463:2019 Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
ISO 11474:1998 Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
ISO 11782-1:1998 Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
ISO 11782-2:1998 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
ISO 11844-1:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
ISO 11844-2:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
ISO 11844-3:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
ISO 11845:2020 Corrosion of metals and alloys — General principles for corrosion testing
ISO 11846:1995 Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
ISO 11881:1999 Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
ISO 11881:1999/Cor 1:1999 Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1
ISO 12473:2017 General principles of cathodic protection in seawater
ISO 12696:2016 Cathodic protection of steel in concrete
ISO 12732:2006 Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal’s method)
ISO 13174:2012 Cathodic protection of harbour installations
ISO 13573:2012 Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
ISO 14802:2012 Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
ISO 14993:2018 Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
ISO 15158:2014 Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
ISO 15257:2017 Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme
ISO 15324:2000 Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
ISO 15329:2006 Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
ISO 16151:2018 Corrosion of metals and alloys — Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
ISO/TR 16203:2016 Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
ISO/TR 16208:2014 Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
ISO/TR 16335:2013 Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
ISO 16539:2013 Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — “Dry” and “wet” conditions at constant absolute humidity
ISO 16540:2015 Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
ISO 16701:2015 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
ISO 16784-1:2006 Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
ISO 16784-2:2006 Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
ISO 17093:2015 Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
ISO 17224:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
ISO 17245:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
ISO 17248:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
ISO 17474:2012 Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
ISO 17475:2005 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 17475:2005/Cor 1:2006 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements — Technical Corrigendum 1
ISO 17752:2012 Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
ISO 17864:2005 Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
ISO 17918:2015 Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
ISO 18069:2015 Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
ISO 18070:2015 Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
ISO 18086:2019 Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
ISO 18089:2015 Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
ISO 19097-1:2018 Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete
ISO 19097-2:2018 Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters
ISO 19280:2017 Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
ISO 21062:2020 Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments
ISO 21153:2018 Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
ISO 21207:2015 Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
ISO 21601:2013 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
ISO 21608:2012 Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
ISO 21610:2009 Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
ISO 22410:2020 Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
ISO 22426:2020 Assessment of the effectiveness of cathodic protection based on coupon measurements
ISO 22479:2019 Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)
ISO 22858:2020 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
ISO 22910:2020 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
ISO 23226:2020 Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
ISO 23449:2020 Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
ISO 23669:2022 Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
ISO 26146:2012 Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
ISO 23123:2020 Corrosion control engineering life cycle — General requirements
ISO 23221:2020 Pipeline corrosion control engineering life cycle — General requirements
ISO 23222:2020 Corrosion control engineering life cycle — Risk assessment
ISO 24239:2022 Corrosion control engineering life cycle in fossil fuel power plants — General requirements

مشخصات فایل
  • فرمت فایلها: PDF
  • آخرین بررسی ویرایشهای فعال: 10-2022
  • تعداد آیتم استاندارد: 112 آیتم استاندارد
  • کلیدواژه : استانداردهای ایزو + استانداردهای ISO TC 156 + استانداردهای خوردگی + حفاظت کاتدی + متالورژی

مجموعه استانداردهای مدیریت کیفیت ایزو پکیج استانداردهای مدیریت کیفیت مجموعه استانداردهاASME پکیج استانداردهای مدیریت کیفیت

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

دکمه بازگشت به بالا