CEN TC 218 , استاندارد شلنگهای لاستیکی

CEN TC 218 (Rubber and plastics hoses and hose assemblies)

دانلود پکیج استانداردهای BS EN برای شلنگ های لاستیک و پلاستیکی (فایلهای EN از کمیته فنی CEN TC 218)

توجه نمایید که فایلهای ISO در این کمیته ، در پکیج فعلی وجود ندارد و آیتمهای ایزو که با ISI TC 45 مشترک است را میتوانید از صفحه ISO TC 45 دانلود نمایید.

لیست استانداردهای این پکیج::

  1. CEN/TS 14421:2006 Hose tail and ferrule for crimping and swaging
  2. CEN/TS 16650:2014 Specification for hose couplings for petrol, oil and lubricants – High pressure couplings
  3. EN 12115:2021 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals – Specification
  4. EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen – Specification
  5. EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems – Specification
  6. EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems – Specification
  7. EN 13765:2018 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals – Specification
  8. EN 14420-1:2013 Hose fittings with clamp units – Part 1: Requirements, types of fixing and connection, designation and testing
  9. EN 14420-2:2013 Hose fittings with clamp units – Part 2: Hose side parts of hose tail
  10. EN 14420-3:2013 Hose fittings with clamp units – Part 3: Clamp units, bolted or pinned
  11. EN 14420-4:2013 Hose fittings with clamp units – Part 4: Flange connections
  12. EN 14420-5:2013 Hose fittings with clamp units – Part 5: Threaded connections
  13. EN 14420-6:2013 Hose fittings with clamp units – Part 6: TW tank truck couplings
  14. EN 14420-7:2013 Hose fittings with clamp units – Part 7: Cam locking couplings
  15. EN 14420-8:2013+A1:2016 Hose fittings with clamp units – Part 8: Symmetrical half coupling (Guillemin system)
  16. EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
  17. EN 14423:2013+A1:2016Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
  18. EN 14424:2013 Hose fittings with screwed ferrules
  19. EN 16643:2016 Rubber and plastics hoses and hose assemblies – Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals – Specification
  20. EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry – Bonded elastomeric hoses with or without a lining
  21. EN 16821:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry – Silicone rubber hoses
  22. EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery – Specification
  23. EN 1762:2017 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
  24. EN 1765:2016 Rubber hose assemblies for oil suction and discharge services – Specification for the assemblies
  25. EN 853:2015 Rubber hoses and hose assemblies – Wire braid reinforced hydraulic type – Specification
  26. EN 854:2015 Rubber hoses and hose assemblies – Textile reinforced hydraulic type – Specification
  27. EN 856:2015 Rubber hoses and hose assemblies – Rubber-covered spiral wire reinforced hydraulic type – Specification
  28. EN 857:2015 Rubber hoses and hose assemblies – Wire braid reinforced compact type for hydraulic applications – Specification

 

مشخصات فایل
امتیاز دهید

دیدگاهتان را بنویسید