ASTM BOS 01.01 , استانداردهای متریال پایپینگ

ASTM Volume 01.01: Steel __Piping, Tubing, Fittings

دانلود استانداردهای ASTM برای لوله، فیتینگ و متریال اقلام پایپینگ
(مجموعه استانداردهای سکشن1 -ولوم 1)

کتاب ASTM 01.01 مجموعه ای شامل بیش از 110 آیتم استاندارد ASTM است که موضوع اصلی آن متریال فولادی پایپینگ، شامل لوله، فیتینگ و تیوب های پایپینگ می باشد.

این استاندارد (مجموعه) بخشی از سری کتب استاندارد ASTM است که به ASTM BOS (Book Of Standard) معروف است.
کتابهای استاندارد astm شامل 15 سکشن و هر سکشن چند بخش (Volume) دارد. کتاب ASTM 01.01 (سکشن 1- بخش 1) به روش‌های آزمایش، مشخصات متریال، و راهنمای طراحی برای محصولات فلزی اختصاص دارد. جلد 01.01 شامل مشخصات و الزامات زیر است:

  1. متریال فولاد برای استفاده در پایپینگ (لوله و تیوب استیل): شامل لوله‌های فولادی سیملس و جوشی.
  2. اتصالات و فیتینگ فلزی-فولادی: الزامات انواع فیتینگ مانند فلنج‌ ، فیتینگهای جوشی و رزوه‌ای.
  3. روش‌های آزمون و بازرسی: روش‌های تست فیزیکی و مکانیکی برای اطمینان از کیفیت مواد و اتصالات.
  4. کاربردهای خاص: استانداردهای مرتبط با کاربردهای خاص صنعتی مانند خطوط فشار بالا و دمای بالا.

لیست استاندارد و ویرایش ASTM VOL 1.01 :

  1. ASTM A53 -24  Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
  2. ASTM A105 -24 Standard Specification for Carbon Steel Forgings for Piping Applications
  3. ASTM A106 -19a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
  4. ASTM A134 -96(2012) Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
  5. ASTM A135 -14 Standard Specification for Electric-Resistance-Welded Steel Pipe
  6. ASTM A139 -22 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
  7. ASTM A178 -02(2012) Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
  8. ASTM A179 -24 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
  9. ASTM A181-14 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
  10. ASTM A182-24b Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
  11. ASTM A192-17 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
  12. ASTM A193-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
  13. ASTM A194-24 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
  14. ASTM A209-03(2012) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
  15. ASTM A210-19 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
  16. ASTM A213-24 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
  17. ASTM A214-12 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
  18. ASTM A234-24 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
  19. ASTM A249-18a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
  20. ASTM A252-10 Standard Specification for Welded and Seamless Steel Pipe Piles
  21. ASTM A254 -12(2019) Standard Specification for Copper-Brazed Steel Tubing
  22. ASTM A268 -16 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
  23. ASTM A269-24 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
  24. ASTM A270-24 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
  25. ASTM A312-24b Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
  26. ASTM A320-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
  27. ASTM A333-24 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
  28. ASTM A334-04a(2016) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
  29. ASTM A335-24 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
  30. ASTM A350-24 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
  31. ASTM A358-24 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
  32. ASTM A369-11(2016) Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
  33. ASTM A376-14 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
  34. ASTM A381-12 Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
  35. ASTM A403-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
  36. ASTM A409-19 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
  37. ASTM A420-24 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
  38. ASTM A423-19 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
  39. ASTM A437-15 Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
  40. ASTM A450-24 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
  41. ASTM A453-17 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
  42. ASTM A498-17 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
  43. ASTM A500-23 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
  44. ASTM A501 -21 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
  45. ASTM A511 -16 Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
  46. ASTM A512 -06 (2012) Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
  47. ASTM A513 -20 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
  48. ASTM A519-24a  Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
  49. ASTM A522-14 (R2019) Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
  50. ASTM A523 -96 (2012) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
  51. ASTM A524 -96 (2012) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
  52. ASTM A530 -18 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
  53. ASTM A540-15 (2021) Standard Specification for Alloy-Steel Bolting for Special Applications
  54. ASTM A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
  55. ASTM A556-96 (2012) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
  56. ASTM A587-96 (2012) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
  57. ASTM A589-06 (2012) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
  58. ASTM A595-14 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
  59. ASTM A618-04 (2015) Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
  60. ASTM A632-04 (2014) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
  61. ASTM A671-20 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
  62. ASTM A672-19 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
  63. ASTM A688-15 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
  64. ASTM A691-09 (2014) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
  65. ASTM A694/A694M-16(2022) Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
  66. ASTM A707/A707M-14 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
  67. ASTM A733-15 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
  68. ASTM A758/A758M-14 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
  69. ASTM A774/A774M-14 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
  70. ASTM A778/A778M-16 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
  71. ASTM A787/A787M-22 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
  72. ASTM A789/A789M-24 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
  73. ASTM A790/A790M-24 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
  74. ASTM A795/A795M-13 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
  75. ASTM A803/A803M-16 Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
  76. ASTM A813/A813M-14 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
  77. ASTM A815/A815M-23 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
  78. ASTM A822/A822M-04 (2015) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
  79. ASTM A836/A836M-14 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
  80. ASTM A847/A847M-14 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
  81. ASTM A858/A858M-14 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
  82. ASTM A860/A860M-22 Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
  83. ASTM A865/A865M-06 (2012) Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
  84. ASTM A908-03 (2013) Standard Specification for Stainless Steel Needle Tubing
  85. ASTM A928/A928M-14 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
  86. ASTM A960/A960M-24a Standard Specification for Common Requirements for Wrought Steel Piping Fittings
  87. ASTM A961/A961M-24a Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
  88. ASTM A962/A962M-24 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
  89. ASTM A972/A972M-00 (2015) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
  90. ASTM A988/A988M-16 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
  91. ASTM A989/A989M-15 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
  92. ASTM A994-24 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
  93. ASTM A999/A999M-23 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
  94. ASTM A1012-10 (2015) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
  95. ASTM A1014/A1014M-16 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
  96. ASTM A1015-01 (2014) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
  97. ASTM A1016/A1016M-24 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
  98. ASTM A1024/A1024M-02 (2012) Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
  99. ASTM A1047/A1047M-05 (2014) Standard Test Method for Pneumatic Leak Testing of Tubing
  100. ASTM A1053/A1053M-12 Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
  101. ASTM A1065/A1065M-18 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
  102. ASTM A1076/A1076M-13 Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
  103. ASTM A1082/A1082M-16 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  104. ASTM A1085/A1085M-22 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
  105. ASTM A1097/A1097M-16 Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger)
  106. ASTM A1098/A1098M-16 Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
  107. ASTM A1103/A1103M-16 Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
  108. ASTM A1110/A1110M-21 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
  109. ASTM A1117-23 Standard Practice for Application of Thermal Spray Aluminum (TSA) Coating to Carbon Steel Pipe
  110. ASTM E527-16 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

 

** با توجه به وسعت و تعداد این پکیج، در صورتی که به کل استانداردها نیاز ندارید میتوانید در سه پارت به صورت جداگانه دانلود کنید.
پکیج پارت 1 شامل استانداردهای A53 تا A381
پکیج پارت 2 شامل استانداردهای A403 تا A795
پکیج پارت 1 شامل استانداردهای A803 تا آخر
برای دانلود تک آیتم و تعداد کمتر، با ادمین در تماس باشید.**

مشخصات فایل

دیدگاهتان را بنویسید

دکمه بازگشت به بالا