ISO TC 156 , مجموعه استانداردهای خوردگی فلزات

ISO TC-156 (Corrosion of metals and alloys)

دانلود آخرین ویرایشهای مجموعه استانداردهای خوردگی فلزات و حفاظت از خوردگی ، از سری استانداردهای ایزو

لیست کامل استانداردهای این مجموعه :

1.  ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
2. ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
3. ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
4. ISO 4212:2023 : Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
5. ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
6. ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
7. ISO 5156:2022 Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method
8. ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
9. ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
10. ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements
11. ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
12. ISO 7539-1:2012 Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
13. ISO 7539-2:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
14. ISO 7539-3:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
15. ISO 7539-4:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
16. ISO 7539-5:1989 Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
17. ISO 7539-6:2018 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
18. ISO 7539-7:2005 Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
19. ISO 7539-8:2000 Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
20. ISO 7539-9:2003 Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
21. ISO 7539-10:2013 Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
22. ISO 7539-11:2013 Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
23. ISO 8044:2020 Corrosion of metals and alloys — Vocabulary
24. ISO 8407:2020 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
25. ISO 8565:2011 Metals and alloys — Atmospheric corrosion testing — General requirements
26. ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
27. ISO 9224:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
28. ISO 9225:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
29. ISO 9226:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
30. ISO 9227:2022 Corrosion tests in artificial atmospheres — Salt spray tests
31. ISO 9400:1990 Nickel-based alloys — Determination of resistance to intergranular corrosion
32. ISO 9591:2004 Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
33. ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
34. ISO 10270:2022 Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
35. ISO 11130:2017 Corrosion of metals and alloys — Alternate immersion test in salt solution
36. ISO 11303:2002 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
37. ISO 11306:1998 Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
38. ISO 11463:2019 Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
39. ISO 11474:1998 Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
40. ISO 11782-1:1998 Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
41. ISO 11782-2:1998 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
42. ISO 11844-1:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
43. ISO 11844-2:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
44. ISO 11844-3:2020 Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
45. ISO 11845:2020 Corrosion of metals and alloys — General principles for corrosion testing
46. ISO 11846:1995 Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
47. ISO 11881:1999 Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
48. ISO 11881:1999/Cor 1:1999 Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1
49. ISO 12473:2017 General principles of cathodic protection in seawater
50. ISO 12696:2016 Cathodic protection of steel in concrete
51. ISO 12732:2006 Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal’s method)
52. ISO 13174:2012 Cathodic protection of harbour installations
53. ISO 13573:2012 Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
54. ISO 14802:2012 Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
55. ISO 14993:2018 Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
56. ISO 15158:2014 Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
57. ISO 15257:2017 Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme
58. ISO 15324:2000 Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
59. ISO 15329:2006 Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
60. ISO 16151:2018 Corrosion of metals and alloys — Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
61. ISO/TR 16203:2016 Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
62. ISO/TR 16208:2014 Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
63. ISO/TR 16335:2013 Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
64. ISO 16539:2013 Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — “Dry” and “wet” conditions at constant absolute humidity
65. ISO 16540:2015 Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
66. ISO 16701:2015 Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
67. ISO 16784-1:2006 Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
68. ISO 16784-2:2006 Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
69. ISO 17081:2014 Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
70. ISO 17093:2015 Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
71. ISO 17224:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
72. ISO 17245:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
73. ISO 17248:2015 Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
74. ISO 17474:2012 Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
75. ISO 17475:2005 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
76. ISO 17475:2005/Cor 1:2006 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements — Technical Corrigendum 1
77. ISO 17752:2012 Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
78. ISO 17864:2005 Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
79. ISO 17918:2015 Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
80. ISO 18069:2015 Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
81. ISO 18070:2015 Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
82. ISO 18086:2019 Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
83. ISO 18089:2015 Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
84. ISO 19097-1:2018 Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete
85. ISO 19097-2:2018 Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters
86. ISO 19280:2017 Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
87. ISO 21062:2020 Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments
88. ISO 21153:2018 Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
89. ISO 21207:2015 Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
90. ISO 21601:2013 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
91. ISO 21608:2012 Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
92. ISO 21610:2009 Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
93. ISO 22410:2020 Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
94. ISO 22426:2020 Assessment of the effectiveness of cathodic protection based on coupon measurements
95. ISO 22479:2019 Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)
96.  ISO 22848:2021 Corrosion of metals and alloys — Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
97. ISO 22858:2020 Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
98. ISO 22910:2020 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
99. ISO 23226:2020 Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
100. ISO 23449:2020 Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
101. ISO 23669:2022 Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
102. ISO 26146:2012 Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
103. ISO 23123:2020 Corrosion control engineering life cycle — General requirements
104. ISO 23221:2020 Pipeline corrosion control engineering life cycle — General requirements
105. ISO 23222:2020 Corrosion control engineering life cycle — Risk assessment
106. ISO 24239:2022 Corrosion control engineering life cycle in fossil fuel power plants — General requirements