ISO TC 45-04 , محصولات لاستیکی بجز شلنگ ها

دانلود استانداردهای BS EN ISO

ISO TC 45-04 : Rubber and rubber products (other than hoses)

 

لیست استانداردهای این مجموعه:

  1.  ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
  2.  ISO 1420:2016 Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
  3.  ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
  4.  ISO 1798:2008 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
  5.  ISO 1856:2018 Flexible cellular polymeric materials — Determination of compression set
  6.  ISO 2230:2002 Rubber products — Guidelines for storage
  7.  ISO 2231:1989 Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
  8.  ISO 2286-1:2016 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass
  9.  ISO 2286-2:2016 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  10.  ISO 2286-3:2016 Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
  11.  ISO 2321:2017 Rubber threads — Methods of test
  12.  ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion
  13.  ISO 2439:2008 Flexible cellular polymeric materials — Determination of hardness (indentation technique)
  14.  ISO 2440:2019 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
  15.  ISO 3011:1997 Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
  16.  ISO 3302-1:2014 Rubber — Tolerances for products — Part 1: Dimensional tolerances
  17.  ISO 3302-2:2022 Rubber — Tolerances for products — Part 2: Geometrical tolerances
  18.  ISO 3303-1:2019 Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 1: Steel-ball method
  19.  ISO 3303-2:2019 Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
  20.  ISO 3385:2014 Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
  21.  ISO 3386-1:1986 Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials
  22.  ISO 3386-1:1986/Amd 1:2010 Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression — Part 1: Low-density materials — Amendment 1
  23.  ISO 3386-2:1997 Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials
  24.  ISO 3386-2:1997/Amd 1:2010 Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density materials — Amendment 1
  25.  ISO 3582:2000 Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
  26.  ISO 3582:2000/Amd 1:2007 Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame — Amendment 1
  27.  ISO 3934:2002 Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods
  28.  ISO 4633:2023 Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
  29.  ISO 4638:1984 Polymeric materials, cellular flexible — Determination of air flow permeability
  30.  ISO 4674-1:2016 Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods
  31.  ISO 4674-2:1998 Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method
  32.  ISO 4675:2017 Rubber- or plastics-coated fabrics — Low-temperature bend test
  33.  ISO 5470-1:2016 Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
  34.  ISO 5470-2:2003 Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader
  35.  ISO 5978:2022 Rubber- or plastics-coated fabrics — Determination of blocking resistance
  36.  ISO 5999:2013 Flexible cellular polymeric materials — Polyurethane foam for load-bearing applications excluding carpet underlay — Specification
  37.  ISO 6072:2011 Rubber — Compatibility between hydraulic fluids and standard elastomeric materials
  38.  ISO 6123-1:2015 Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
  39.  ISO 6123-2:2015 Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
  40.  ISO 6123-3:1985 Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
  41.  ISO 6446:1994 Rubber products — Bridge bearings — Specification for rubber materials
  42.  ISO 6451:1982 Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion
  43.  ISO 6452:2021 Rubber- or plastics-coated fabrics — Determination of fogging characteristics of trim materials in the interior of automobiles
  44.  ISO 6453:1985 Polymeric materials, cellular flexible — Polyvinylchloride foam sheeting — Specification
  45.  ISO 6916-1:1995 Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting
  46.  ISO 6916-1:1995/Amd 1:2007 Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Amendment 1
  47.  ISO 6916-1:1995/Cor 1:2002 Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting — Technical Corrigendum 1: Sheeting
  48.  ISO 6916-2:2001 Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions
  49.  ISO 7229:2022 Rubber- or plastics-coated fabrics — Measurement of gas permeability
  50.  ISO 7231:2022 Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop
  51.  ISO 7617-1:2001 Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics
  52.  ISO 7617-2:2003 Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics
  53.  ISO/TR 7620:2005 Rubber materials — Chemical resistance
  54.  ISO 7854:1995 Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing
  55.  ISO 8067:2018 Flexible cellular polymeric materials — Determination of tear strength
  56.  ISO 8095:1990 PVC-coated fabrics for tarpaulins — Specification
  57.  ISO 8096:2005 Rubber- or plastics-coated fabrics for water-resistant clothing — Specification
  58.  ISO 8096:2005/Cor 1:2005 Rubber- or plastics-coated fabrics for water-resistant clothing — Specification — Technical Corrigendum 1
  59.  ISO 8307:2018 Flexible cellular polymeric materials — Determination of resilience by ball rebound
  60.  ISO 9631:2018 Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
  61.  ISO 9691:1992 Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections
  62.  ISO 10282:2023 Single-use sterile rubber surgical gloves — Specification
  63.  ISO 11193-1:2020 Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solution
  64.  ISO 11193-2:2006 Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)
  65.  ISO 13362:2000 Flexible cellular polymeric materials — Determination of compression set under humid conditions
  66.  ISO 14285:2014 Rubber and plastics gloves for food services — Limits for extractable substances
  67.  ISO 16010:2019 Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
  68.  ISO/TR 17051:2020 Rubber, vulcanized — Guidelines for material specification
  69.  ISO 20057:2017 Rubber household gloves — General requirements and test methods
  70.  ISO 20058:2017 General purpose rubber thread — Specification
  71.  ISO 21171:2006 Medical gloves — Determination of removable surface powder
  72.  ISO 22751:2020 Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force
  73.  ISO 22762-1:2018 Elastomeric seismic-protection isolators — Part 1: Test methods
  74.  ISO 22762-2:2010 Elastomeric seismic-protection isolators — Part 2: Applications for bridges — Specifications
  75.  ISO 22762-3:2018 Elastomeric seismic-protection isolators — Part 3: Applications for buildings — Specifications
  76.  ISO/TS 22762-4:2014 Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3
  77.  ISO 22762-5:2021 Elastomeric seismic-protection isolators — Part 5: Sliding seismic-protection isolators for buildings
  78.  ISO 22762-6:2022 Elastomeric seismic-protection isolators — Part 6: High-durability and high-performance specifications and test methods
  79.  ISO 22843:2020 Rubber bands — General requirements and test methods
  80.  ISO 23464:2020 Nitrile cleanroom gloves — Specification
  81.  ISO 23711:2003 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
  82.  ISO 24999:2008 Flexible cellular polymeric materials — Determination of fatigue by a constant-strain procedure
  83.  ISO 25518:2021 Single-use rubber gloves for general applications — Specification
  84.  ISO 32100:2018 Rubber- or plastics-coated fabrics — Physical and mechanical tests — Determination of flex resistance by the flexometer method
مشخصات فایل
امتیاز دهید
دیدگاه کاربران

دیدگاهتان را بنویسید