ISO TC 45-02 , تست و آنالیز محصولات لاستیکی

ISO TC 45-02 : Rubber and rubber products_Testing and analysis

 

لیست استانداردهای این مجموعه:

  1.  ISO 34-1:2015 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
  2.  ISO 34-2:2022 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces
  3.  ISO 36:2011 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
  4.  ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
  5.  ISO 48-1:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 1: Introduction and guidance
  6.  ISO 48-2:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 2: Hardness between 10 IRHD and 100 IRHD
  7.  ISO 48-3:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
  8.  ISO 48-4:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)
  9.  ISO 48-5:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 5: Indentation hardness by IRHD pocket meter method
  10.  ISO 48-6:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 6: Apparent hardness of rubber-covered rollers by IRHD method
  11.  ISO 48-7:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
  12.  ISO 48-8:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
  13.  ISO 48-9:2018 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
  14.  ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
  15.  ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
  16.  ISO 247-1:2018 Rubber — Determination of ash — Part 1: Combustion method
  17.  ISO 247-2:2018 Rubber — Determination of ash — Part 2: Thermogravimetric analysis (TGA)
  18.  ISO 289-1:2015 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity
  19.  ISO 289-2:2016 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics
  20.  ISO 289-3:2015 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
  21.  ISO/TS 289-4:2017 Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate
  22.  ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
  23.  ISO 813:2016 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
  24.  ISO 814:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
  25.  ISO 815-1:2019 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
  26.  ISO 815-2:2019 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures
  27.  ISO 1407:2011 Rubber — Determination of solvent extract
  28.  ISO 1408:1995 Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods
  29.  ISO 1431-1:2022 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
  30.  ISO 1431-3:2017 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
  31.  ISO 1432:2021 Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)
  32.  ISO 1817:2022 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
  33.  ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
  34.  ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
  35.  ISO 2007:2018 Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method
  36.  ISO 2285:2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
  37.  ISO 2781:2018 Rubber, vulcanized or thermoplastic — Determination of density
  38.  ISO 2782-1:2016 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
  39.  ISO 2782-2:2018 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method
  40.  ISO 2878:2017 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance
  41.  ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
  42.  ISO 2951:2019 Rubber, vulcanized rubber — Determination of insulation resistance
  43.  ISO 3384-1:2019 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature
  44.  ISO 3384-2:2019 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 2: Testing with temperature cycling
  45.  ISO 3387:2020 Rubber — Determination of crystallization effects by hardness measurements
  46.  ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
  47.  ISO 4647:2010 Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
  48.  ISO 4649:2017 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
  49.  ISO 4650:2012 Rubber — Identification — Infrared spectrometric methods
  50.  ISO 4661-2:2018 Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests
  51.  ISO 4662:2017 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
  52.  ISO 4664-1:2011 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 1: General guidance
  53.  ISO 4664-2:2006 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 2: Torsion pendulum methods at low frequencies
  54.  ISO 4664-3:2021 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 3: Glass transition temperature (Tg)
  55.  ISO 4665:2016 Rubber, vulcanized or thermoplastic — Resistance to weathering
  56.  ISO 4666-1:2010 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles
  57.  ISO 4666-3:2016 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
  58.  ISO 4666-4:2018 Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 4: Constant-stress flexometer
  59.  ISO 5600:2017 Rubber — Determination of adhesion to rigid materials using conical shaped parts
  60.  ISO 5603:2017 Rubber, vulcanized — Determination of adhesion to wire cord
  61.  ISO 5893:2019 Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification
  62.  ISO 6101-1:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content
  63.  ISO 6101-2:2019 Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead content
  64.  ISO 6101-3:2014 Rubber — Determination of metal content by atomic absorption spectrometry — Part 3: Determination of copper content
  65.  ISO 6101-4:2014 Rubber — Determination of metal content by atomic absorption spectrometry — Part 4: Determination of manganese content
  66.  ISO 6101-5:2018 Rubber — Determination of metal content by atomic absorption spectrometry — Part 5: Determination of iron content
  67.  ISO 6101-6:2018 Rubber — Determination of metal content by atomic absorption spectrometry — Part 6: Determination of magnesium content
  68.  ISO 6133:1998 Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
  69.  ISO 6179:2017 Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique)
  70.  ISO 6502-1:2018 Rubber — Measurement of vulcanization characteristics using curemeters — Part 1: Introduction
  71.  ISO 6502-2:2018 Rubber — Measurement of vulcanization characteristics using curemeters — Part 2: Oscillating disc curemeter
  72.  ISO 6502-3:2018 Rubber — Measurement of vulcanization characteristics using curemeters — Part 3: Rotorless curemeter
  73.  ISO 6505:2015 Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals
  74.  ISO 6914:2013 Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension
  75.  ISO 6943:2017 Rubber, vulcanized — Determination of tension fatigue
  76.  ISO 7270-1:2010 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 1: Identification of polymers (single polymers and polymer blends)
  77.  ISO 7270-2:2012 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
  78.  ISO 7323:2006 Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method
  79.  ISO 7725:2020 Rubber and rubber products — Determination of chlorine and bromine content
  80.  ISO 7743:2017 Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties
  81.  ISO 8013:2019 Rubber, vulcanized — Determination of creep in compression or shear
  82.  ISO 9028:2006 Rubber — Dissolution by acid digestion
  83.  ISO 9924-1:2000 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
  84.  ISO 9924-2:2000 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers
  85.  ISO 9924-3:2009 Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
  86.  ISO 10398:1998 Rubber — Identification of accelerators in cured and uncured compounds
  87.  ISO 11345:2006 Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods
  88.  ISO 11346:2014 Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use
  89.  ISO/TR 12134:2010 Rubber — Estimation of uncertainty for test methods — Non-functional parameters
  90.  ISO 13145:2012 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
  91.  ISO 14309:2011 Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity
  92.  ISO 15113:2005 Rubber — Determination of frictional properties
  93.  ISO 17257:2020 Rubber — Identification of polymers — Pyrolytic gas-chromatographic method using mass-spectrometric detection
  94.  ISO 18766:2014 Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide
  95.  ISO 18899:2013 Rubber — Guide to the calibration of test equipment
  96.  ISO 19050:2021 Rubber, raw, vulcanized — Determination of metal content by ICP-OES
  97.  ISO 19983:2017 Rubber — Determination of precision of test methods
  98.  ISO 20163:2019 Vulcanized rubber — Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)
  99.  ISO 20463:2018 Rubber and rubber products — Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials
  100.  ISO 23233:2016 Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc
  101.  ISO 23529:2016 Rubber — General procedures for preparing and conditioning test pieces for physical test methods
  102.  ISO 24453:2008 Rubber — Acquisition and presentation of comparable single-point data
  103.  ISO 24454:2008 Rubber — Acquisition and presentation of comparable multi-point data
مشخصات فایل
مجموعه استانداردهاASME پکیج استانداردهای مدیریت کیفیت

دیدگاهتان را بنویسید

دکمه بازگشت به بالا