ISO TC 33 , مجموعه استانداردهای نسوز ها

دانلود پکیج استانداردهای مواد نسوز در صنعت ، با نام ISO TC 33

ISO TC 33 مجموعه بسیار کاملی، از استاندارد مهم اروپایی، استاندارد ایزو ، استاندارد BS می باشد که موضوع همه آیتم ها بررسی مواد نسوز (Refractories) در صنایع است.

ممکن است برخی آیتم ها نسخه قدیمی باشند ولی همگی تا سال 2021 به عنوان آخرین نسخه مرجع شناخته میشوند.

لیست استانداردهای این مجموعه شامل موارد زیر است:

ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness)
ISO 836:2001 Terminology for refractories
ISO 1146:1988 Pyrometric reference cones for laboratory use — Specification
ISO 1893:2007 Refractory products — Determination of refractoriness under load — Differential method with rising temperature
ISO 1927-1 +2+3+4+5+6+7~ 1927-8 :2012 Monolithic (unshaped) refractory products
ISO 2245:2006 Shaped insulating refractory products — Classification
ISO 2477:2005 Shaped insulating refractory products — Determination of permanent change in dimensions on heating
ISO 2478:1987 Dense shaped refractory products — Determination of permanent change in dimensions on heating
ISO 3187:1989 Refractory products — Determination of creep in compression
ISO 5013:1985 Refractory products — Determination of modulus of rupture at elevated temperatures
ISO 5014:1997 Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature
ISO 5016:1997 Shaped insulating refractory products — Determination of bulk density and true porosity
ISO 5017:2013 Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
ISO 5018:1983 Refractory materials — Determination of true density
ISO 5019-1:1984 Refractory bricks — Dimensions — Part 1: Rectangular bricks
ISO 5019-2:1984 Refractory bricks — Dimensions — Part 2: Arch bricks
ISO 5019-3:1984 Refractory bricks — Dimensions — Part 3: Rectangular checker bricks for regenerative furnaces
ISO 5019-4:1988 Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs
ISO 5019-5:1984 Refractory bricks — Dimensions — Part 5: Skewbacks
ISO 5019-6:2005 Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters
ISO 5022:1979 Shaped refractory products — Sampling and acceptance testing
ISO 5417:1986 Refractory bricks for use in rotary kilns — Dimensions
ISO 8656-1:1988 Refractory products — Sampling of raw materials and unshaped products — Part 1: Sampling scheme
ISO 8840:1987 Refractory materials — Determination of bulk density of granular materials (grain density)
ISO 8841:1991 Dense, shaped refractory products — Determination of permeability to gases
ISO 8890:1988 Dense shaped refractory products — Determination of resistance to sulfuric acid
ISO 8894-1:2010 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer)
ISO 8894-2:2007 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method (parallel)
ISO 8895:2004 Shaped insulating refractory products — Determination of cold crushing strength
ISO 9205:1988 Refractory bricks for use in rotary kilns — Hot-face identification marking
ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
ISO 10058-2:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
ISO 10059-1:1992 Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
ISO 10059-2:2003 Dense, shaped refractory products — Determination of cold compressive strength — Part 2: Test with packing
ISO 10060:1993 Dense, shaped refractory products — Test methods for products containing carbon
ISO 10081-1:2003 Classification of dense shaped refractory products — Part 1: Alumina-silica
ISO 10081-2:2003 Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon
ISO 10081-2:2003/COR 1:2008 Classification of dense shaped refractory products — Part 2: Basic products containing less than 7 % residual carbon — Technical Corrigendum 1
ISO 10081-3:2003 Classification of dense shaped refractory products — Part 3: Basic products containing from 7 % to 50 % residual carbon
ISO 10081-4:2014 Classification of dense shaped refractory products — Part 4: Special products
ISO 10635:1999 Refractory products — Methods of test for ceramic fibre products
ISO 12676:2000 Refractory products — Determination of resistance to carbon monoxide
ISO 12677:2011 Chemical analysis of refractory products by X-ray fluorescence (XRF) — Fused cast-bead method
ISO 12678-1:1996 Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimensions and conformity to drawings
ISO 12678-2:1996 Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 2: Corner and edge defects and other surface imperfections
ISO 12680-1:2005 Methods of test for refractory products — Part 1: Determination of dynamic Young’s modulus (MOE) by impulse excitation of vibration
ISO 13765-1:2004 Refractory mortars — Part 1: Determination of consistency using the penetrating cone method
ISO 13765-2:2004 Refractory mortars — Part 2: Determination of consistency using the reciprocating flow table method
ISO 13765-3:2004 Refractory mortars — Part 3: Determination of joint stability
ISO 13765-4:2004 Refractory mortars — Part 4: Determination of flexural bonding strength
ISO 13765-5:2004 Refractory mortars — Part 5: Determination of grain size distribution (sieve analysis)
ISO 13765-6:2004 Refractory mortars — Part 6: Determination of moisture content of ready-mixed mortars
ISO 14719:2011 Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline
ISO 14720-1:2013 Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods
ISO 14720-2:2013 Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
ISO 16282:2007 Methods of test for dense shaped refractory products — Determination of resistance to abrasion at ambient temperature
ISO 16334:2013 Monolithic refractory products — Determination of resistance to explosive spalling
ISO 16349:2015 Refractory materials — Determination of abrasion resistance at elevated temperature
ISO 16835:2014 Refractory products — Determination of thermal expansion
ISO 18886:2016 Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
ISO 20182:2008 Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns
ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica
ISO 20565-2:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis
ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES)
ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation
ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon
ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
ISO 21078-1:2008 Determination of boron (III) oxide in refractory products — Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
ISO 21078-2:2006 Determination of boron(III) oxide in refractory products — Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
ISO 21079-1 & 2 & 3 :2008 Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method)
ISO 21587-1:2007 + ISO 21587-2:2007 + ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method)
ISO 21736:2020 Refractories — Test methods for thermal shock resistance
ISO/TR 21828:2010 Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
ISO 22016:2015 Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods
ISO 22605:2020 Refractories — Determination of dynamic Young’s modulus (MOE) at elevated temperatures by impulse excitation of vibration
ISO 26845:2008 Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods

مشخصات فایل
  • فرمت فایلها: PDF
  • زبان نگارش: انگلیسی
  • بررسی اخرین ویرایشهای فعال: 05-2023
  • کمیته فنی: iso tc 33
  • تعداد صفحات: جمعن بیش از 1000 صفحه
  • کلیدواژه : نسوز ها + متریال + استاندارد ایزو + عایق حرارتی
مجموعه استانداردهاASME پکیج استانداردهای مدیریت کیفیت

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

دکمه بازگشت به بالا