ISO TC 2-DIRECT , استانداردهای عمومی بستنده ها
ISO TC 002 / DIRECT (fasteners)
دانلود مجموعه استانداردهای بین المللی ایزو برای انواع بستنده ها، پیچ و مهره های کاربردی در صنایع (مجموعه استانداردهای کمیته فنی ISO TC 2-DIRECT)
لیست استاندارد پکیج ISO TC 2-DIRECT :
- ISO 887:2000+COR 1:2006 Plain washers for metric bolts, screws and nuts for general purposes — General plan — Technical Corrigendum 1
- ISO 898-3:2017 + A1-2020 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
- ISO 1051:1999 Rivet shank diameters
- ISO 1234:1997 Split pins
- ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
- ISO 2339:1986 Taper pins, unhardened
- ISO 2340:1986 Clevis pins without head
- ISO 2341:1986 Clevis pins with head
- ISO 3506-1:2020 Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
- ISO 3506-2:2020 Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes
- ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress
- ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws
- ISO 3506-6:2020 Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
- ISO 4759-3:2016 Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F
- ISO 7089:2000 Plain washers — Normal series — Product grade A
- ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A
- ISO 7091:2000 Plain washers — Normal series — Product grade C
- ISO 7092:2000 Plain washers — Small series — Product grade A
- ISO 7093-1:2000 Plain washers — Large series — Part 1: Product grade A
- ISO 7093-2:2000 Plain washers — Large series — Part 2: Product grade C
- ISO 7094:2000 Plain washers — Extra large series — Product grade C
- ISO 7094:2000/COR 1:2000 Plain washers — Extra large series — Product grade C — Technical Corrigendum 1
- ISO 8733:1997 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
- ISO 8734:1997 Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)
- ISO 8735:1997 Parallel pins with internal thread, of hardened steel and martensitic stainless steel
- ISO 8737:1986 Taper pins with external thread, unhardened
- ISO 8738:1986 Plain washers for clevis pins — Product grade A
- ISO 8739:1997 Grooved pins — Full-length parallel grooved, with pilot
- ISO 8740:1997 Grooved pins — Full-length parallel grooved, with chamfer
- ISO 8741:1997 Grooved pins — Half-length reverse-taper grooved
- ISO 8742:1997 Grooved pins — One-third-length centre grooved
- ISO 8743:1997 Grooved pins — Half-length centre grooved
- ISO 8744:1997 Grooved pins — Full-length taper grooved
- ISO 8745:1997 Grooved pins — Half-length taper grooved
- ISO 8746:1997 Grooved pins with round head
- ISO 8747:1997 Grooved pins with countersunk head
- ISO 8748:2007 Spring-type straight pins — Coiled, heavy duty
- ISO 8749:1986 Pins and grooved pins — Shear test
- ISO 8750:2007 Spring-type straight pins — Coiled, standard duty
- ISO 8751:2007 Spring-type straight pins — Coiled, light duty
- ISO 8752:2009 Spring-type straight pins — Slotted, heavy duty
- ISO 10669:1999 Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A
- ISO 13337:2009 Spring-type straight pins — Slotted, light duty
- ISO 14588:2000 Blind rivets — Terminology and definitions
- ISO 14589:2000 Blind rivets — Mechanical testing
- ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head — AlA/St
- ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head — AlA/St
- ISO 15975:2002 Closed end blind rivets with break pull mandrel and protruding head — AI/AIA
- ISO 15976:2002 Closed end blind rivets with break pull mandrel and protruding head — St/St
- ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/St
- ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/St
- ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head — St/St
- ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head — St/St
- ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/AIA
- ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head — AIA/AIA
- ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head — A2/A2
- ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head — A2/A2
- ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners
- ISO 16582:2002 Open end blind rivets with break pull mandrel and protruding head — Cu/St or Cu/Br or Cu/SSt
- ISO 16583:2002 Open end blind rivets with break pull mandrel and countersunk head — Cu/St or Cu/Br or Cu/SSt
- ISO 16584:2002 Open end blind rivets with break pull mandrel and protruding head — NiCu/St or NiCu/SSt
- ISO 16585:2002 Closed end blind rivets with pull mandrel and protruding head — A2/SSt
مشخصات فایل
- فرمت فایل ها: PDF
- زبان نگارش: انگلیسی
- کمیته فنی: ISO TC 2
- بررسی آخرین ویرایشهای فعال: 2022
- کلیدواژه: استاندارد ISO + استانداردهای پیچ و مهره + بستنده ها