ISO TC 138-5 , مشخصات متریال پلاستیکی لوله کشی

ISO TC 138-5 : General properties of pipes, fittings and valves of plastic materials and their accessories — Test methods and basic specifications

دانلود پکیج استانداردهای ایزو برای مشخصات عمومی لوله و فیتینگ و ولو و شیرآلات پلاستیکی و روشهای ابتدایی تست آنها (مجموعه استانداردهای ISO TC 138-5)

لیست استانداردهای ISO TC 138-5 :

1. ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
2. ISO 1167-1:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
3. ISO 1167-2:2006 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
4. ISO 1167-3:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components
5. ISO 1167-4:2007 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
6. ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
7. ISO 2507-1:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
8. ISO 2507-2:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
9. ISO 2507-3:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
10. ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Testmethod
11. ISO 3126:2005 Plastics piping systems — Plastics components — Determination of dimensions
12. ISO 3127:1994 Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
13. ISO 3213:2009 Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
14. ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
15. ISO 3459:2022 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
16. ISO 3501:2021 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
17. ISO 3503:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
18. ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
19. ISO 4059:1978 Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
20. ISO 4439:1979 Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density
21. ISO 6259-1:2015 Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
22. ISO 6259-2:2020 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
23. ISO 6259-3:2015 Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
24. ISO 6964:2019 Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
25. ISO 7245:1984 Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials
26. ISO 7387-1:1983 Adhesives with solvents for assembly of PVC-U pipe elements — Characterization — Part 1: Basic test methods
27. ISO 7686:2005 Plastics pipes and fittings — Determination of opacity
28. ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints
29. ISO 9080:2012 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
30. ISO 9311-1:2005 Adhesives for thermoplastic piping systems — Part 1: Determination of film properties
31. ISO 9311-2:2011 Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength
32. ISO 9311-3:2005 Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure
33. ISO 9852:2007 Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
34. ISO 9853:1991 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test
35. ISO 9854-1:2023 Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method
36. ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials
37. ISO 9967:2016 Thermoplastics pipes — Determination of creep ratio
38. ISO 9969:2016 Thermoplastics pipes — Determination of ring stiffness
39. ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
40. ISO 10147:2011 Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
41. ISO 11173:1994 Thermoplastics pipes — Determination of resistance to external blows — Staircase method
42. ISO 11413:2019 Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
43. ISO 11414:2009 Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
44. ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
45. ISO 13056:2011 Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum
46. ISO 13477:2008 Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
47. ISO 13478:2007 Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
48. ISO 13479:2009 Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
49. ISO 13480:1997 Polyethylene pipes — Resistance to slow crack growth — Cone test method
50. ISO 13760:1998 Plastics pipes for the conveyance of fluids under pressure — Miner’s rule — Calculation method for cumulative damage
51. ISO 13761:2017 Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
52. ISO 13844:2021 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
53. ISO 13845:2015 Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
54. ISO 13951:2015 Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
55. ISO 13953:2001 +AMD 1:2020 Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
56. ISO 13954:1997+AMD 1:2020 Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1
57. ISO 13955:1997 Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
58. ISO 13955:1997/AMD 1:2020 Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1
59. ISO 13956:2010 Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
60. ISO 13957:1997 Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
61. ISO 13967:2009 Thermoplastics fittings — Determination of ring stiffness
62. ISO 13968:2008 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
63. ISO 15853:1999 Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
64. ISO 15908:2002 Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives
65. ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
66. ISO 16871:2003 Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering
67. ISO/TR 16913:1999 Plastics pipes and fittings — Definitions of types of test
68. ISO/TS 16943:2019 Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing
69. ISO 17454:2006 Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig
70. ISO 17455:2005+COR 1:2007 Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe — Technical Corrigendum 1
71. ISO 17456:2006 Plastics piping systems — Multilayer pipes — Determination of long-term strength
72. ISO 17778:2015 Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
73. ISO/TR 18124:2006 Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
74. ISO 18373-1:2007 Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1: Measurement of the processing temperature
75. ISO 18373-2:2008 Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2: Measurement of the enthalpy of fusion of crystallites
76. ISO 18488:2015 Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
77. ISO 18489:2015 Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
78. ISO 18553:2002+AMD 1:2007 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1
79. ISO 19893:2011 Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling
80. ISO 19899:2010 Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
81. ISO/TS 19911:2010 Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings
82. ISO 21751:2011 Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
83. ISO/TS 22499:2019 Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing
84. ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength