ISO TC 138-2 , لوله و فیتینگ پلاستیک مصارف آب

ISO TC 138/SC-02 : Plastics pipes and fittings for water supplies

دانلود پکیج استانداردهای ایزو برای لوله و فیتینگ های پلاستیکی جهت استفاده در لوله کشی سیستم آب رسانی (مجموعه استانداردهای ISO TC 138-2)

لیست استانداردهای ISO TC 138-2 :

1. ISO 727-1:2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series
2. ISO 727-2:2005 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 2: Inch-based series
3. ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General
4. ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes
5. ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 3: Fittings
6. ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 4: Valves
7. ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system
8. ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
9. ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series
10. ISO/TR 4191:2014 Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation
11. ISO 4427-1:2019 Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) — Part 1: General
12. ISO 4427-2:2019 + A1 2023   Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 2: Pipes
13. ISO 4427-3:2019 Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 3: Fittings
14. ISO 4427-5:2019 Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) — Part 5: Fitness for purpose of the system
15. ISO 8779:2020 Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications
16. ISO 8796:2004 Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
17. ISO 9624:2019+A1 2021 Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions
18. ISO 10508:2006 Plastics piping systems for hot and cold water installations — Guidance for classification and design
19. ISO 13783:1997 Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure
20. ISO 13846:2000 Plastics piping systems — End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping — Test method for long-term leaktightness under internal water pressure
21. ISO 15874-1:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 1: General
22. ISO 15874-2:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
23. ISO 15874-2:2013/AMD 1:2018 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes — Amendment 1
24. ISO 15874-3:2013 +A1 2018 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings
25. ISO 15874-5:2013/AMD 1:2018 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system — Amendment 1
26. ISO/TS 15874-7:2018 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity
27. ISO 15875-1:2003 +A1 2007 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General
28. ISO 15875-2:2003/AMD 2:2020 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2
29. ISO 15875-3:2003/AMD 1:2020 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings — Amendment 1
30. ISO 15875-5:2003/AMD 1:2020 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system — Amendment 1
31. ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity
32. ISO 15876-1:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General
33. ISO 15876-2:2017/AMD 1:2020 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes — Amendment 1
34. ISO 15876-3:2017/AMD 2:2021 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings — Amendment 2
35. ISO 15876-5:2017/AMD 1:2020 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system — Amendment 1
36. ISO/TS 15876-7:2018 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 7: Guidance for the assessment of conformity
37. ISO 15877-1:2009 +A1 2010 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General
38. ISO 15877-2:2009/AMD 2:2020 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes — Amendment 2
39. ISO 15877-3:2009/AMD 1:2010 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings — Amendment 1
40. ISO 15877-5:2009/AMD 2:2020 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2
41. ISO/TS 15877-7:2018 Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 7: Guidance for the assessment of conformity
42. ISO 16422:2014 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
43. ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
44. ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
45. ISO 21003-2:2008/AMD 1:2011 Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
46. ISO 21003-3:2008+A1 2023  Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
47. ISO 21003-5:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
48. ISO/TS 21003-7:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity
49. ISO 21004:2006 Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply
50. ISO 22391-1:2009 Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General
51. ISO 22391-2:2009 +A1 2020 Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
52. ISO 22391-3:2009/AMD 1:2020 Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 3: Fittings — Amendment 1
53. ISO 22391-5:2009/AMD 1:2020 Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system — Amendment 1
54. ISO/TS 22391-7:2018 Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity
55. ISO/TR 27165:2012 Thermoplastics piping systems – Guidance for definitions of wall constructions for pipes