IEC TC 36 , استانداردهای عایق الکتریکال

IEC TC 36 (Standards Set) : Insulators

دانلود پکیج کامل استانداردهای بین المللی IEC برای عایق ها در صنعت برق و الکتریکال
(مجموعه استانداردهای کمیته فنی IEC TC 36)

دامنه کاربرد پکیج IEC TC 36 : استاندارد سازی عایق ها برای سیستم ها و تجهیزات فشار قوی برق شامل بوشینگ ها، عایق های خطوط هوایی کابل برق و پست ها و کوپلینگ های آنها می باشد.

لیست استانداردهای این مجموعه:

IEC 60120:2020 Ball and socket couplings of string insulator units – Dimensions

IEC 60168:1994+AMD1 + AMD2:2000   Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V

IEC 60305:1995  Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for AC systems – Characteristics of insulator units of the cap and pin type

IEC 60372:2003  Locking devices for ball and socket couplings of string insulator units – Dimensions and tests

IEC 60383-1:1993  Insulators for overhead lines with a nominal voltage above 1000 V – Part 1: Ceramic or glass insulator units for a.c. systems – Definitions, test methods and acceptance criteria

IEC 60383-2:1993 Insulators for overhead lines with a nominal voltage above 1000 V – Part 2: Insulator strings and insulator sets for a.c. systems – Definitions, test methods and acceptance criteria

IEC 60433:1998  Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic insulators for AC systems – Characteristics of insulator units of the long rod type

IEC 60437:1997 Radio interference test on high-voltage insulators

IEC 60471:2020 Clevis and tongue couplings of string insulator units – Dimensions

IEC 60507:2013 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

IEC TR 60575:1977 Thermal-mechanical performance test and mechanical performance test on string insulator units

IEC 60660:1999 Insulators – Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

IEC 60720:1981 Characteristics of line post insulators

IEC TR 60797:1984 Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric

IEC TS 60815-1:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 1: Definitions, information and general principles

IEC TS 60815-2:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 2: Ceramic and glass insulators for a.c. systems

IEC TS 60815-3:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 3: Polymer insulators for a.c. systems

IEC TS 60815-4:2016 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 4: Insulators for d.c. systems

IEC 61109:2008 Insulators for overhead lines – Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria

IEC 61211:2004 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V – Impulse puncture testing in air

IEC TS 61245:2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems

IEC 61325:1995 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for d.c. systems – Definitions, test methods and acceptance criteria

IEC 61462:2007    Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V – Definitions, test methods, acceptance criteria and design recommendations

IEC 61466-1:2016 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 1: Standard strength and end fittings

IEC 61466-2:1998 + AMD1:2002 Amendment 1 – Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 2: Dimensional and electrical characteristics

IEC 61466-2:1998/AMD2:2018 Amendment 2 – Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 2: Dimensional and electrical characteristics

IEC 61467:2008 Insulators for overhead lines – Insulator strings and sets for lines with a nominal voltage greater than 1 000 V – AC power arc tests

IEC 61952:2008 Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria

IEC 61952-1:2019 Insulators for overhead lines – Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V – Part 1: definitions, end fittings and designations

IEC TS 62073:2016 Guidance on the measurement of hydrophobicity of insulator surfaces

IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V

IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria

IEC 62223:2009 Insulators – Glossary of terms and definitions

IEC 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV – Definitions, test methods and acceptance criteria

IEC 62231-1:2015 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV – Part 1: Dimensional, mechanical and electrical characteristics

IEC TS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V

IEC TR 62662:2010 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials

IEC TR 62730:2012 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test

IEC 62772:2016  Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V – Definitions, test methods and acceptance criteria

IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications – Definitions, test methods and acceptance criteria

• فرمت فایل ها: PDF
• زبان نگارش: انگلیسی
• کمیته فنی: IEC TC 36
• بررسی آخرین ویرایشهای فعال تا: 2022
• کلیدواژه: استاندارد IEC + استانداردهای برق + کابل برق + عایق الکتریسیته