EU-94-13 , استانداردهای لباس کار و پوششهای ایمنی

دانلود استانداردهای BS EN ISO

EU-94-13 STANDARDS SET (ISO TC 94/SC-13 + CEN TC 162) : Personal protective equipment __Protective clothing

دانلود پکیج استانداردهای اروپا : BS , EN , ISO با محوریت وسائل ایمنی فردی ، لباس کار و پوششهای ایمنی فردی
(مجموعه استانداردهای کمیته فنی ISO TC 94-13 به همراه استانداردهای BS EN از کمیته فنی CEN TC 162)

لیست استانداردهای این مجموعه  : (در صورتی که به کل پکیج نیازی ندارید، میتوانید استانداردهای ISO TC 94-13 و یا استانداردهای CEN-162 را جداگانه خریداری و دانلود نمایید)

لیست پکیج ISO 94-13

  1.  ISO 374-1:2016+ Amd 1:2018  Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks — Amendment 1
  2.  ISO 374-2:2019  Protective gloves against dangerous chemicals and micro-organisms — Part 2: Determination of resistance to penetration
  3.  ISO 374-4:2019  Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals
  4.  ISO 374-5:2016  Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks
  5.  ISO/TR 2801:2007  Clothing for protection against heat and flame — General recommendations for selection, care and use of protective clothing
  6.  ISO 6529:2013   Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases
  7.  ISO 6530:2005   Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids
  8.  ISO 6942:2021  Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
  9.  ISO 9150:1988  Protective clothing — Determination of behaviour of materials on impact of small splashes of molten metal
  10.  ISO 9151:2016   Protective clothing against heat and flame — Determination of heat transmission on exposure to flame
  11.  ISO 9185:2007   Protective clothing — Assessment of resistance of materials to molten metal splash
  12.  ISO 11393-1:1998   Protective clothing for users of hand-held chainsaws — Part 1: Test rig for testing resistance to cutting by a chainsaw
  13.  ISO 11393-2:1999   Protective clothing for users of hand-held chainsaws — Part 2: Performance requirements and test methods for leg protectors
  14.  ISO 11393-3:1999   Protective clothing for users of hand-held chainsaws — Part 3: Test methods for footwear
  15.  ISO 11393-4:2003   Protective clothing for users of hand-held chainsaws — Part 4: Performance requirements and test methods for protective gloves
  16.  ISO 11393-6:2018   Protective clothing for users of hand-held chainsaws — Part 6: Performance requirements and test methods for upper body protectors
  17.  ISO 11610:2021  Protective clothing — Vocabulary
  18.  ISO 11611:2015 Protective clothing for use in welding and allied processes
  19.  ISO 11612:2015 Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements
  20.  ISO 12127-1:2015 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder
  21.  ISO 13506-1:2017 Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin
  22.  ISO 13506-2:2017 Protective clothing against heat and flame — Part 2: Skin burn injury prediction — Calculation requirements and test cases
  23.  ISO 13688:2013 Protective clothing — General requirements
  24.  ISO 13982-1:2004+ Amd 1:2010 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) — Amendment 1
  25.  ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
  26.  ISO 13994:2005/Cor 1:2006 Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure — Technical Corrigendum 1
  27.  ISO 13995:2000 Protective clothing — Mechanical properties — Test method for the determination of the resistance to puncture and dynamic tearing of materials
  28.  ISO 13996:1999 Protective clothing — Mechanical properties — Determination of resistance to puncture
  29.  ISO 13997:2023 Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects
  30.  ISO 13998:2003 Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives
  31.  ISO 13999-1:1999 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain-mail gloves and arm guards
  32.  ISO 13999-2:2003 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 2: Gloves and arm guards made of material other than chain mail
  33.  ISO 13999-3:2002 Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 3: Impact cut test for fabric, leather and other materials
  34.  ISO 14116:2015 Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing
  35.  ISO 14460:1999 + 2002   Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods
  36.  ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives
  37.  ISO 15025:2016 Protective clothing — Protection against flame — Method of test for limited flame spread
  38.  ISO 16602:2007 + 2012   Protective clothing for protection against chemicals — Classification, labelling and performance requirements
  39.  ISO 16603:2004 Clothing for protection against contact with blood and body fluids — Determination of the resistance of protective clothing materials to penetration by blood and body fluids — Test method using synthetic blood
  40.  ISO 16604:2004 Clothing for protection against contact with blood and body fluids — Determination of resistance of protective clothing materials to penetration by blood-borne pathogens — Test method using Phi-X 174 bacteriophage
  41.  ISO 17491-1:2012 Protective clothing — Test methods for clothing providing protection against chemicals — Part 1: Determination of resistance to outward leakage of gases (internal pressure test)
  42.  ISO 17491-2:2012 Protective clothing — Test methods for clothing providing protection against chemicals — Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)
  43.  ISO 17491-3:2008 Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid (jet test)
  44.  ISO 17491-4:2008 + Amd 1:2016 Protective clothing — Test methods for clothing providing protection against chemicals — Part 4: Determination of resistance to penetration by a spray of liquid (spray test) — Amendment 1
  45.  ISO 17491-5:2013 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)
  46.  ISO 17492:2019 Clothing for protection against heat and flame — Determination of heat transmission on exposure to both flame and radiant heat
  47.  ISO 17493:2016 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven
  48.  ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers — Performance requirements
  49.  ISO 19918:2017 Protective clothing — Protection against chemicals — Measurement of cumulative permeation of chemicals with low vapor pressure through materials
  50.  ISO 20320:2020 Protective clothing for use in snowboarding — Wrist protectors — Requirements and test methods
  51.  ISO 20471:201 + Amd 1:2016 High visibility clothing — Test methods and requirements — Amendment 1
  52.  ISO 21420:2020 Protective gloves — General requirements and test methods
  53.  ISO 22608:2004 Protective clothing — Protection against liquid chemicals — Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials
  54.  ISO 22609:2004 Clothing for protection against infectious agents — Medical face masks — Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected)
  55.  ISO 22610:2018 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment — Test method to determine the resistance to wet bacterial penetration
  56.  ISO 22612:2005 Clothing for protection against infectious agents — Test method for resistance to dry microbial penetration
  57.  ISO 23388:2018 Protective gloves against mechanical risks
  58.  ISO 27065:2017 Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers

 

لیست پکیج CEN-162 

 

  1. CEN/TR 14560:2018 Guidance for selection, use, care and maintenance of protective clothing against heat and flame
  2. CEN/TR 15321:2006 Guidelines on the selection, use, care and maintenance of protective clothing
  3. CEN/TR 15419:2017 Protective clothing – Guidelines for selection, use, care and maintenance of chemical protective clothing
  4. CEN/TS 15256:2005  SCAN  Protective clothing – Hand, arm, leg, genital and neck protectors for use in ice hockey – Protectors for players other than goalkeepers – Requirements and test methods
  5. EN 1073-1:2016+A1:2018  Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
  6. EN 1073-2:2002   Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
  7. EN 1082-1:1996   Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards
  8. EN 1082-2:2000   Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail
  9. EN 1082-3:2000   Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 3: Impact cut test for fabric, leather and other materials
  10. EN 1149-1:2006   Protective clothing – Electrostatic properties – Part 1: Test method for measurement of surface resistivity
  11. EN 1149-2:1997   Protective clothing – Electrostatic properties – Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
  12. EN 1149-3:2004   Protective clothing – Electrostatic properties – Part 3: Test methods for measurement of charge decay
  13. EN 1149-5:2008  Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements
  14. EN 12477:2001/A1:2005  Protective gloves for welders
  15. EN 13034:2005+A1:2009  Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
  16. EN 13061:2009  Protective clothing – Shin guards for association football players – Requirements and test methods
  17. EN 13138-1:2014  Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be worn
  18. EN 13138-2:2014  Buoyant aids for swimming instruction – Part 2: Safety requirements and test methods for buoyant aids to be held
  19. EN 13138-3:2014  Buoyant aids for swimming instruction – Part 3: Safety requirements and test methods for swim seats into which a user is positioned
  20. EN 13158:2018 Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods
  21. EN 13277-1:2000 Protective equipment for martial arts – Part 1: General requirements and test methods
  22. EN 13277-2:2000 Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
  23. EN 13277-3:2013 Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors
  24. EN 13277-4:2001/A1:2007 Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectors
  25. EN 13277-5:2002 Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
  26. EN 13277-6:2003 Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females
  27. EN 13277-7:2009 Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors
  28. EN 13277-8:2017 Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors
  29. EN 13546:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods
  30. EN 13567:2002+A1:2007 Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods
  31. EN 13594:2015 Protective gloves for motorcycle riders – Requirements and test methods
  32. EN 13911:2017 Protective clothing for firefighters – Requirements and test methods for fire hoods for firefighters
  33. EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods
  34. EN 14058:2017+A1:2021 Protective clothing – Garments for protection against cool environments
  35. EN 14120:2003+A1:2007 Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods
  36. EN 14126:2003/AC:2004 Protective clothing – Performance requirements and tests methods for protective clothing against infective agents
  37. EN 14225-1:2017 Diving suits – Part 1: Wet suits – Requirements and test methods
  38. EN 14225-2:2017 Diving suits – Part 2: Dry suits – Requirements and test methods
  39. EN 14225-3:2017 Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods
  40. EN 14325:2018 Protective clothing against chemicals – Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
  41. EN 14328:2005 Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods
  42. EN 14360:2004 Protective clothing against rain – Test method for ready made garments – Impact from above with high energy droplets
  43. EN 14404:2004+A1:2010 Personal protective equipment – Knee protectors for work in the kneeling position
  44. EN 14404-1:2019 Personal protective equipment – Knee protectors for work in the kneeling position – Part 1: Test methods
  45. EN 14404-2:2019 Personal protective equipment – Knee protectors for work in the kneeling position – Part 2: Requirements for wearable knee protectors (type 1)
  46. EN 14404-3:2019 Personal protective equipment – Knee protectors for work in the kneeling position – Part 3: Requirements for the individual combination of knee pads and garments (type 2)
  47. EN 14404-4:2019 Personal protective equipment – Knee protectors for work in the kneeling position – Part 4: Requirements for the combination of interoperable knee pads and garments (type 2)
  48. EN 14404-5:2019 Personal protective equipment – Knee protectors for work in the kneeling position – Part 5: Requirements for knee mats (type 3)
  49. EN 14404-6:2019 Personal protective equipment – Knee protectors for work in the kneeling position – Part 6: Requirements for kneeling systems (type 4)
  50. EN 14605:2005+A1:2009 Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
  51. EN 14786:2006 Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions – Atomizer test
  52. EN 1486:2007 Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting
  53. EN 15613:2008 Knee and elbow protectors for indoor sports – Safety requirements and test methods
  54. EN 16027:2011 Protective clothing – Gloves with protective effect for association football goal keepers
  55. EN 1621-1:2012 Motorcyclists’ protective clothing against mechanical impact – Part 1: Motorcyclists’ limb joint impact protectors – Requirements and test methods
  56. EN 1621-2:2014 Motorcyclists’ protective clothing against mechanical impact – Part 2: Motorcyclists’ back protectors – Requirements and test methods
  57. EN 1621-3:2018 Motorcyclists’ protective clothing against mechanical impact — Part 3: Motorcyclists’ chest protectors – Requirements and test methods
  58. EN 1621-4:2013 Motorcyclists’ protective clothing against mechanical impact – Part 4: Motorcyclists’ inflatable protectors – Requirements and test methods
  59. EN 16350:2014 Protective gloves – Electrostatic properties
  60. EN 16523-1:2015+A1:2018 Determination of material resistance to permeation by chemicals – Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact
  61. EN 16523-2:2015 Determination of material resistance to permeation by chemicals – Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact
  62. EN 16689:2017 Protective clothing for firefighters – Performance requirements for protective clothing for technical rescue
  63. EN 16778:2016 Protective gloves – The determination of Dimethylformamide in gloves
  64. EN 17092-1:2020 Protective garments for motorcycle riders – Part 1: Test methods
  65. EN 17092-2:2020 Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements
  66. EN 17092-3:2020 Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements
  67. EN 17092-4:2020 Protective garments for motorcycle riders – Part 4: Class A garments – Requirements
  68. EN 17092-5:2020 Protective garments for motorcycle riders – Part 5: Class B garments – Requirements
  69. EN 17092-6:2020 Protective garments for motorcycle riders – Part 6: Class C garments – Requirements
  70. EN 17353:2020 Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements
  71. EN 17673:2021  Protective clothing – Protection against heat and flame – Requirements and test methods for garments with integrated smart textiles and non textile elements
  72. EN 342:2017 Protective clothing – Ensembles and garments for protection against cold
  73. EN 343:2007  Protective clothing – Protection against rain
  74. EN 348:1992/AC:1993 Protective clothing – Test method: Determination of behaviour of materials on impact of small splashes of molten metal
  75. EN 388:2016+A1:2018 Protective gloves against mechanical risks
  76. EN 407:2020 Protective gloves and other hand protective equipments against thermal risks (heat and/or fire)
  77. EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination
  78. EN 464:1994 Protective clothing – Protection against liquid and gaseous chemicals, including aerosols and solid particles – Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test)
  79. EN 469:2020 Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities
  80. EN 510:1993  Specification for protective clothing for use where there is a risk of entanglement with moving parts
  81. EN 511:2006 Protective gloves against cold
  82. EN 530:2010 Abrasion resistance of protective clothing material – Test methods
  83. EN 659:2003+A1:2008/AC:2009 Protective gloves for firefighters
  84. EN 863:1995 Protective clothing – Mechanical properties – Test method: Puncture resistance
  85. EN 943-1:2015  Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
  86. EN 943-2:2002 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)

 

مشخصات فایل
  • فرمت فایل: PDF
  • زبان نگارش: انگلیسی
  • بررسی آخرین ویرایشهای فعال: 5-2023
  • کمیته فنی(ISO): ISO TC 94 / SC-13
  • کمیته فنی(CEN): CEN TC 162
  • کلیدواژه: استانداردهای ISO + استانداردهای BS EN + استانداردهای ایمنی + تجهیزات ایمنی فردی
4.5/5 __(4 امتیاز)
دیدگاه کاربران

دیدگاهتان را بنویسید