EU-135-5 , پکیج استانداردهای تست رادیوگرافی

ISO 135-5 + EN FILES (STANDARD SET) : NDT __ Radiographic Testing

دانلود پکیج استانداردهای اروپا BS EN ISO ، برای بازرسی غیر مخرب، بخش 5 _ روشهای ارزیابی و تست غیر مخرب NDT توسط آزمونهای رادیوگرافی “RT”  (مجموعه استانداردهای کمیته فنی ISO TC 135-5 به همراه استانداردهای مربوطه EN از کمیته فنی CEN TC 138)

لیست استانداردها:

 

  1. ISO 5576:1997 Non-destructive testing — Industrial X-ray and gamma-ray radiology — Vocabulary
  2. ISO 5579:2013 Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
  3. ISO 5580:1985 Non-destructive testing — Industrial radiographic illuminators — Minimum requirements
  4. ISO 11699-1:2008 Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography
  5. ISO 11699-2:2018 Non-destructive testing — Industrial radiographic films — Part 2: Control of film processing by means of reference values
  6. ISO 12721:2000 Non-destructive testing — Thermal neutron radiographic testing — Determination of beam L/D ratio
  7. ISO 14096-1:2005 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
  8. ISO 14096-2:2005 Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements
  9. ISO 15708-1:2017 Non-destructive testing — Radiation methods for computed tomography — Part 1: Terminology
  10. ISO 15708-2:2017 Non-destructive testing — Radiation methods for computed tomography — Part 2: Principles, equipment and samples
  11. ISO 15708-3:2017 Non-destructive testing — Radiation methods for computed tomography — Part 3: Operation and interpretation
  12. ISO 15708-4:2017 Non-destructive testing — Radiation methods for computed tomography — Part 4: Qualification
  13. ISO 16371-1:2011 Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems
  14. ISO 16371-2:2017 Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays
  15. ISO 16526-1:2011 Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 1: Voltage divider method
  16. ISO 16526-2:2011 Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 2: Constancy check by the thick filter method
  17. ISO 16526-3:2011 Non-destructive testing — Measurement and evaluation of the X-ray tube voltage — Part 3: Spectrometric method
  18. ISO 19232-1:2013 Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
  19. ISO 19232-2:2013 Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
  20. ISO 19232-3:2013 Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes
  21. ISO 19232-4:2013 Non-destructive testing — Image quality of radiographs — Part 4: Experimental evaluation of image quality values and image quality tables
  22. ISO 19232-5:2018 Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpness and basic spatial resolution value using duplex wire-type image quality indicators
  23. ISO 20769-1:2017 Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 1: Tangential radiographic inspection
  24. ISO 20769-2:2017 Non-destructive testing — Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays — Part 2: Double wall radiographic inspection
  25. ISO 21432:2008 Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction
  26. ISO 23159:2020 Non-destructive testing — Gamma ray scanning method on process columns
  27. EN 12543-1:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 1: Scanning method
  28. EN 12543-2:2021 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 2: Pinhole camera radiographic method
  29. EN 12543-3:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 3: Slit camera radiographic method
  30. EN 12543-4:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 4: Edge method
  31. EN 12543-5:1999 Non-destructive testing – Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing – Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
  32. EN 12679:2018 Non-destructive testing – Radiographic testing – Determination of the size of industrial radiographic gamma sources
  33. EN 13068-1:1999 Non-destructive testing – Radioscopic testing – Part 1: Quantitative measurement of imaging properties
  34. EN 13068-2:1999 Non-destructive testing – Radioscopic testing – Part 2: Check of long term stability of imaging devices
  35. EN 13068-3:2001 Non-destructive testing – Radioscopic testing – Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
  36. EN 1330-11:2007 Non-destructive testing – Terminology – Terms used in X-ray diffraction from polycrystalline and amorphous materials
  37. EN 1330-3:1997 Non-destructive testing – Terminology – Part 3: Terms used in industrial radiographic testing
  38. EN 13925-1:2003 Non-destructive testing – X-ray diffraction from polycrystalline and amorphous material – Part 1: General principles
  39. EN 13925-2:2003 Non-destructive testing – X-ray diffraction from polycrystalline and amorphous materials – Part 2: Procedures
  40. EN 13925-3:2005 Non destructive testing – X ray diffraction from polycrystalline and amorphous materials – Part 3: Instruments
  41. EN 14784-1:2005 Non-destructive testing – Industrial computed radiography with storage phosphor imaging plates – Part 1: Classification of systems
  42. EN 15305:2008 Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction
  43. EN 15305:2008/AC:2009 Non-destructive Testing – Test Method for Residual Stress analysis by X-ray Diffraction
مشخصات فایل
  • فرمت فایل ها: PDF
  • زبان نگارش: انگلیسی
  • کمیته فنی ایزو: ISO TC 135
  • کمیته فنی(CEN) : CEN TC 138
  • ویرایشها فعال تا: 05-2023
  • حجم دانلود: 55 مگابایت
  • کلیدواژه: استاندارد ISO + استانداردهای EN + استانداردهای NDT + بازرسی غیر مخرب + تست رادیوگرافی
امتیاز دهید

دیدگاهتان را بنویسید