EU-017-3 , استانداردهای اروپا برای فولاد استراکچر

ISO TC 17-3 + CEN TC 459-3 : STRUCTURAL STEEL (Standard Set)

دانلود پکیج استانداردهای اروپایی BS EN ISO ، برای فولادهای کاربردی در استراکچر فلزی

این پکیج، شامل استانداردهای دو کمیته ISO TC 17 /SC3  و CEN TC 459 /SC3 می باشد که شامل بالغ بر 70 استاندارد بسیار مهم و کاربردی در صنعت سازه و استراکچر فولادی می باشد. مجموع مبلغ دلاری این استانداردها، بیش از 1000 دلار است که در اختیار شما قرار داده شده است.

لیست استانداردهای این مجموعه: (در صورتی که به همه استانداردها نیاز ندارید، می توانید بخش ISO و یا بخش CEN (استانداردهای EN)  را جداگانه خریداری و دانلود نمایید)

بخش اول : استانداردهای ISO TC 17-3 : 

1. ISO 630-1 –2021 __Structural steels — Part 1: General technical delivery conditions for hot-rolled products
2. ISO 630-2 –2021 __Structural steels — Part 2: Technical delivery conditions for structural steels for general purposes
3. ISO 630-3 –2021 __Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels
4. ISO 630-4 –2021 __Structural steels — Part 4: Technical delivery conditions for high yield strength quenched and tempered structural steel plates and wide flats
5. ISO 630-5 –2014 __Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
6. ISO 630-6 –2014 __Structural steels — Part 6: Technical delivery conditions for seismic-improved structural steels for building
7. ISO 657-1 –1989 __Hot-rolled steel sections — Part 1: Equal-leg angles — Dimensions
8. ISO 657-2 –1989 __Hot-rolled steel sections — Part 2: Unequal-leg angles — Dimensions
9. ISO 657-5 –1976 __Hot-rolled steel sections — Part 5: Equal-leg angles and unequal-leg angles — Tolerances for metric and inch series
10. ISO 657-11 –1980 __ Hot-rolled steel sections — Part 11: Sloping flange channel sections (Metric series) — Dimensions and sectional properties
11. ISO 657-15 –1980 __Hot-rolled steel sections — Part 15: Sloping flange beam sections (Metric series) — Dimensions and sectional properties
12. ISO 657-18 –1980 __Hot-rolled steel sections — Part 18: L sections for shipbuilding (metric series) — Dimensions, sectional properties and tolerances
13. ISO 657-19 –1980 __Hot-rolled steel sections — Part 19: Bulb flats (metric series) — Dimensions, sectional properties and tolerances
14. ISO 657-21 –1983 __Hot-rolled steel sections — Part 21: T-sections with equal depth and flange width — Dimensions
15. ISO 1035-1 –1980 __Hot-rolled steel bars — Part 1: Dimensions of round bars
16. ISO 1035-2 –1980 __Hot-rolled steel bars — Part 2: Dimensions of square bars
17. ISO 1035-3 –1980 __Hot-rolled steel bars — Part 3: Dimensions of flat bars
18. ISO 1035-4 –1982 __Hot-rolled steel bars — Part 4: Tolerances
19. ISO 4950-1 –1995 +A1 2003 __High yield strength flat steel products — Part 1: General requirements
20. ISO 4950-2 –1995 +A1 2003 __High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
21. ISO 4950-3 –1995 +A1 2003 __ High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition
22. ISO 4951-1 –2001 __ High yield strength steel bars and sections — Part 1: General delivery requirements
23. ISO 4951-2 –2001 __High yield strength steel bars and sections — Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels
24. ISO 4951-3 –2001 __High yield strength steel bars and sections — Part 3: Delivery conditions for thermomechanically-rolled steels
25. ISO 6930-1 & 6930-2 –2004 __ High yield strength steel plates and wide flats for cold forming — Delivery conditions
26. ISO 7452 –2013 __Hot-rolled steel plates — Tolerances on dimensions and shape
27. ISO 7778 –2014 __Through-thickness characteristics for steel products
28. ISO 7788 –2021 __Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
29. ISO 9034 –1987 __Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
30. ISO 20723 –2004 __Structural steels — Surface condition of hot-rolled sections — Delivery requirements

بخش دوم : استانداردهای CEN 459-3 :

1. CEN/TR 10347–2006 __ Guidance for forming of structural steels in processing
2. EN 10024–1995 __Hot rolled taper flange I sections – Tolerances on shape and dimensions
3. EN 10025-1–2004 __Hot rolled products of structural steels – Part 1: General technical delivery conditions
4. EN 10025-2–2019 __Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels
5. EN 10025-3–2019 __Hot rolled products of structural steels – Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
6. EN 10025-4–2019 +A1- 2022 __Hot rolled products of structural steels – Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
7. EN 10025-5–2019 __ Hot rolled products of structural steels – Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
8. EN 10025-6–2019 +A1- 2022 __ Hot rolled products of structural steels – Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
9. EN 10029–2010 __Hot-rolled steel plates 3 mm thick or above – Tolerances on dimensions and shape
10. EN 10034–1993 __Structural steel I and H sections – Tolerances on shape and dimensions
11. EN 10051–2010 __Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels – Tolerances on dimensions and shape
12. EN 10055–1995 __ Hot rolled steel equal flange tees with radiused root and toes – Dimensions and tolerances on shape and dimensions
13. EN 10056-1–2017 __ Structural steel equal and unequal leg angles – Part 1: Dimensions
14. EN 10056-2–1993 __Structural steel equal and unequal leg angles – Part 2: Tolerances on shape and dimensions
15. EN 10058–2018 __ Hot rolled flat steel bars and steel wide flats for general purposes – Dimensions and tolerances on shape and dimensions
16. EN 10059–2003 __Hot rolled square steel bars for general purposes – Dimensions and tolerances on shape and dimensions
17. EN 10060–2003 __Hot rolled round steel bars for general purposes – Dimensions and tolerances on shape and dimensions
18. EN 10061–2003 __ Hot rolled hexagon steel bars for general purposes – Dimensions and tolerances on shape and dimensions
19. EN 10067–1996 __ Hot rolled bulb flats – Dimensions and tolerances on shape, dimensions and mass
20. EN 10092-1–2003 __Hot rolled spring steel flat bars – Part 1: Flat bars – Dimensions and tolerances on shape and dimensions
21. EN 10092-2–2003 __ Hot rolled spring steel flat bars – Part 2: Ribbed and grooved spring leaves – Dimensions and tolerances on shape and dimensions
22. EN 10149-1–2013 __ Hot rolled flat products made of high yield strength steels for cold forming – Part 1: General technical delivery conditions
23. EN 10149-2–2013 __Hot rolled flat products made of high yield strength steels for cold forming – Part 2: Technical delivery conditions for thermomechanically rolled steels
24. EN 10149-3–2013 __ Hot rolled flat products made of high yield strength steels for cold forming – Part 3: Technical delivery conditions for normalized or normalized rolled steels
25. EN 10163-1–2004 +AC 2007 __Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections – Part 1: General requirements
26. EN 10163-2–2004 __Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections – Part 2: Plate and wide flats
27. EN 10163-3–2004 __ Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections – Part 3: Sections
28. EN 10164–2018 __ Steel products with improved deformation properties perpendicular to the surface of the product – Technical delivery conditions
29. EN 10210-1–2006 __ Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
30. EN 10210-2–2019 __Hot finished steel structural hollow sections – Part 2: Tolerances, dimensions and sectional properties
31. EN 10210-3–2020 __ Hot finished steel structural hollow sections – Part 3: Technical delivery conditions for high strength and weather resistant steels
32. EN 10219-1–2006 __Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions
33. EN 10219-2–2019 __ Cold formed welded steel structural hollow sections – Part 2: Tolerances, dimensions and sectional properties
34. EN 10219-3–2020 __ Cold formed welded steel structural hollow sections – Part 3: Technical delivery conditions for high strength and weather resistant steels
35. EN 10225-1–2019 __ Weldable structural steels for fixed offshore structures – Technical delivery conditions – Part 1: Plates
36. EN 10225-2–2019 __ Weldable structural steels for fixed offshore structures – Technical delivery conditions – Part 2: Sections
37. EN 10225-3–2019 +A1:2023 __ Weldable structural steels for fixed offshore structures – Technical delivery conditions – Part 3: Hot finished hollow sections
38. EN 10225-4–2019 __Weldable structural steels for fixed offshore structures – Technical delivery conditions – Part 4: Cold formed welded hollow sections
39. EN 10238–2009 __Automatically blast-cleaned and automatically prefabrication primed structural steel products
40. EN 10248-1–2022 __ Hot rolled sheet piling of non alloy steels – Part 1: Technical delivery conditions
41. EN 10248-2–1995 __Hot rolled sheet piling of non alloy steels – Part 2: Tolerances on shape and dimensions
42. EN 10249-1–2022 __Cold formed sheet piling of non alloy steels – Part 1: Technical delivery conditions
43. EN 10249-2–1995 __ Cold formed sheet piling of non alloy steels – Part 2: Tolerances on shape and dimensions
44. EN 10279–2000 __Hot rolled steel channels – Tolerances on shape, dimensions and mass
45. EN 10363–2016 __Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip – Tolerances on dimensions and shape
46. EN 10365–2017 __ Hot rolled steel channels, I and H sections – Dimensions and masses