ASME PTB-15

ASME PTB-15 : FULL MATRIX CAPTURE TRAINING MANUAL

دانلود آخرین ویرایش استاندارد ASME PTB 15

لیست مهمترین سرفصلهای استاندارد ASME PTB-15 :

• 1 HISTORY
• 2 FMC-TFM
  2. 1 Full Matrix Capture (FMC)
  2.2 Total Focusing Method (TFM)
  2.3 Wave Type, Reconstruction Mode
  2.4 Amplitude Fidelity
  2.5 Scan Plan
  2 . 6 Fourier and Hilbert Transforms
• 3 TFMs
  3 . 1 Synthetic Aperture Focusing Technique
  3 .2 Virtual Source Aperture
  3.3 Migration and Inverse Wave Extrapolation (IWEX), crossover between NDT and
  Geophysics
  3 .4 Iterative TFM
  3 . 5 Adaptive TFM-A Framework
  3.6 PWI-ML
  3.7 Sectorial Total Focusing
  3.8 TFMiTM
  3.9 Phase Coherence Imaging
• 4 INSTRUMENTS
  4. 1 Hardware Challenges
  4.2 Deployment Schemes/Scanning Equipment.
• 5 ARRAYS
  5 . 1 Abstract
  5.2 Basic Overview of Ultrasonic Transducers and Their Construction
  5.3 Transducer Arrays
  5 .4 Transducer Sound Fields
  5.5 Array Design for FMC
  5.6 Transducer Standards
  5 .7 Conclusions and Recommendations
• 6 MODELING
  6. 1 General benefits o f weld simulation
  6 . 2 Inspection Simulation
  6 . 3 Using Modeling for TFM Inspection
• 7 ADVANTAGES AND LIMITATIONS OF FMC/TFM VERSUS PAUT
  7 .1 Advantages
  7.2 Limitations
• 8 SIZING TECHNIQUES
  8 . 1 Length and Height Sizing
• 9 FRACTURE MECHANICS FLAW CHARACTERIZATION
  9 . 1 Introduction to Fracture Behavior
  9.2 Overview of Fracture Mechanics
  9 .3 History of Fracture Mechanics
  9.4 Two Main Categories of Fracture Mechanics
  9.5 Application of Fracture Mechanics
  9.6 ASME Code Margins and Safety
  9.7 Flaw Evaluation Procedures Using Fracture Mechanics
  9.8 Acceptance Criteria Examples
  9.9 Applying the Acceptance Criteria Tables and Using Interpolation
• 10 APPLICATIONS
  10.1 In-service Inspections: FMC Techniques for High Temperature Hydrogen Attack
  Assessment
  10.2 FMC/TFM Based Inspection of Small-Diameter Components for F AC Damage
  10.3 Crack Growth Monitoring with PAUT and TFM
  10.4 Weld Examination-Introduction
• Appendix A: FMC-TFM Data of Internal Surface (ID), External Surface (OD) and Mid-Wall Types
  of Defects Represented by Notches
• Appendix B : TFM Data Presentation and Flaws Sizing