AASHTO M-SERIE

استاندارد AASHTO

AASHTO M-SERI (Standard Specifications)

دانلود پکیج استانداردهای سری AASHTO M 

لیست استانداردها:

  1. AASHTO M 6 —2013 Standard Specification for Fine Aggregate for Hydraulic Cement Concrete
  2. AASHTO M 20 —1970-R2004
  3. AASHTO M 31 —2018 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
  4. AASHTO M 43 —2005 Standard Specification for Sizes of Aggregate for Road and Bridge Construction
  5. AASHTO M 45 —2018 Standard Specification for Aggregate for Masonry Mortar
  6. AASHTO M 57 —1980-R2008 Standard Specification for Materials for Embankments and Subgrades
  7. AASHTO M 80 —2013 Standard Specification for Coarse Aggregate for Hydraulic Cement Concrete
  8. AASHTO M 81 —1992-R2008 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
  9. AASHTO M 82 —1975-R2008 Standard Specification for Cutback Asphalt (Medium-Curing Type)
  10. AASHTO M 85 —2012 Standard Specification for Portland Cement
  11. AASHTO M 86 —2009 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
  12. AASHTO M 92 —2010-R2015 Standard Specification for Wire-Cloth Sieves for Testing Purposes
  13. AASHTO M 102 —2006-R2011 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
  14. AASHTO M 111 —2015 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
  15. AASHTO M 116 —2011 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
  16. AASHTO M 121 —2000 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
  17. AASHTO M 124 —1986 Standard Specification for Zinc Oxide Pigments
  18. AASHTO M 133 —1995 Standard Specification for Preservatives and Pressure Treatment Processes for Timber
  19. AASHTO M 138 —2013 Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
  20. AASHTO M 140 —2013 Standard Specification for Emulsified Asphalt
  21. AASHTO M 143 —2013 Standard Specification for Sodium Chloride
  22. AASHTO M 144 —2014 Standard Specification for Calcium Chloride
  23. AASHTO M 145 —1995-R2012 Standard Specification for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
  24. AASHTO M 146 —1991 (2008) Standard Specification for Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials
  25. AASHTO M 147 —1965 (2012) Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses
  26. AASHTO M 148 —2005 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
  27. AASHTO M 153 —2006-R2011 Standard Specification for Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
  28. AASHTO M 154 —2012 (2016) Standard Specification for Air-Entraining Admixtures for Concrete
  29. AASHTO M 156 —2013-R2017 Standard Specification for Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
  30. AASHTO M 157 —2013 Standard Specification for Ready-Mixed Concrete
  31. AASHTO M 160 —2022 Standard Specification for General Requirements for Rolled Steel Plates, Shapes, Sheet Piling and Bars for Structural Use –ASTM A6/A6M
  32. AASHTO M 164 —2014 Standard Specification for High-Strength Bolts for Structural Steel Joints
  33. AASHTO M 167 —2018 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
  34. AASHTO M 168 —2007-R2012 Standard Specification for Wood Products
  35. AASHTO M 170 —2016 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  36. AASHTO M 170M —2016 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
  37. AASHTO M 173 —2001 Standard Specification for Concrete Joint-Sealer, Hot-Poured Elastic Type
  38. AASHTO M 175 —2005-R2009 Standard Specification for Perforated Concrete Pipe
  39. AASHTO M 176— 2007 Standard Specification for Porous Concrete Pipe [Superseded: ASTM C654
  40. AASHTO M 178 —2007 Standard Specification for Concrete Drain Tile [Superseded: AASHTO M 178M
  41. AASHTO M 180 —2012 Standard Specification for Corrugated Sheet Steel Beams for Highway Guardrail
  42. AASHTO M 182 —2005-R2009 Standard Specification for Burlap Cloth Made from Jute or Kenaf and Cotton Mats
  43. AASHTO M 194 —2000 Standard Specification for Chemical Admixtures for Concrete
  44. AASHTO M 195 —2011 Standard Specification for Lightweight Aggregates for Structural Concrete
  45. AASHTO M 197— 2006-R2011 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
  46. AASHTO M 200 —1973 (2012) Standard Specification for Epoxy Protective Coatings
  47. AASHTO M 201 —2013 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
  48. AASHTO M 202—2008 Standard Specification for Steel Sheet Piling
  49. AASHTO M 203—2012 Standard Specification for Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement
  50. AASHTO M 204—2015 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
  51. AASHTO M 206— 2015 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Superseded: AASHTO M 206M
  52. AASHTO M 207—2023 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Superseded: AASHTO M 207M
  53. AASHTO M 208— 2001(2009) Standard Specification for Cationic Emulsified Asphalt
  54. AASHTO M 216 —2013 Standard Specification for Lime for Soil Stabilization
  55. AASHTO M 222 —2019 Standard Specification for High-Strength Low-Alloy Structural Steel with 345 MPa (50 ksi) Minimum-Yield Point to 100 mm (4 in.) Thick Nineteenth Edition; ASTM A588M/A588
  56. AASHTO M 223 —2018 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
  57. AASHTO M 231 —1995 (2015) Standard Specification for Weighing Devices Used in the Testing of Materials
  58. AASHTO M 232— 2016 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
  59. AASHTO M 237 —1996(2014) Standard Specification for Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete
  60. AASHTO M 247 —2013 Standard Specification for Glass Beads Used in Pavement Markings
  61. AASHTO M 249 —2012 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
  62. AASHTO M 251 —2006 (2016) Standard Specification for Plain and Laminated Elastomeric Bridge Bearings
  63. AASHTO M 252 —2009 Standard Specification for Corrugated Polyethylene Drainage Pipe
  64. AASHTO M 253— 2014 Standard Specification for Structural Bolts, Alloy Steel, Heat-Treated, 150 ksi Minimum Tensile Strength
  65. AASHTO M 254— 2006 (2015) Standard Specification for Corrosion-Resistant Coated Dowel Bars
  66. AASHTO M 270—2023 Standard Specification for Structural Steel for Bridges
  67. AASHTO M 278 —2015 Standard Specification for Class PS46 Poly(Vinyl Chloride) (PVC) Pipe
  68. AASHTO M 288 —2015 Standard Specification for Geotextile Specification for Highway Applications
  69. AASHTO M 294 —2016 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
  70. AASHTO M 295 —2019 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  71. AASHTO M 297 —2010-R2015 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
  72. AASHTO M 300 —2021 Standard Specification for Inorganic Zinc-Rich Primer
  73. AASHTO M 302— 2019 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
  74. AASHTO M 303 —1989 (2010) Standard Specification for Lime for Asphalt Mixtures
  75. AASHTO M 304 —2011 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter
  76. AASHTO M 306 —2010 Standard Specification for Drainage, Sewer, Utility, and Related Castings
  77. AASHTO M 307— 2013 Standard Specification for Silica Fume Used in Cementitious Mixtures
  78. AASHTO M 314 —1990-R2008 Standard Specification for Steel Anchor Bolts
  79. AASHTO M 316 —2013 Standard Specification for Polymer-Modified Cationic Emulsified Asphalt
  80. AASHTO M 318 —2002 (2010) Standard Specification for Glass Cullet Use for Soil-Aggregate Base Course
  81. AASHTO M 319— 2002 (2010) Standard Specification for Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course
  82. AASHTO M 320 —2021 Standard Specification for Performance-Graded Asphalt Binder
  83. AASHTO M 321 —2004-R2012 Standard Specification for High-Reactivity Pozzolans for Use in Hydraulic-Cement Concrete, Mortar, and Grout
  84. AASHTO M 322— 2010 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
  85. AASHTO M 323 —2017 Standard Specification for Superpave Volumetric Mix Design
  86. AASHTO M 324 —2012 Standard Practice for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
  87. AASHTO M 325 —2008 Standard Specification for Stone Matrix Asphalt (SMA) [Superseded: AASHTO MP 8
  88. AASHTO M 327 —2019 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
  89. AASHTO M 328 Inertial Profiler Revision
  90. AASHTO M 329M/M 329-11 Standard Specification for Stainless Clad Deformed and Plain Round Steel Bars for Concrete Reinforcement
  91. AASHTO M 332— 2021 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test

 

 

مشخصات فایل
  • فرمت فایل ها: PDF
  • زبان نگارش: انگلیسی
  • کمیته فنی: AASHTO Standard Specification (M)
  • حجم دانلود: 115
  • کلیدواژه: استاندارد AASHTO + سیویل + استانداردهای سیویل
دیدگاه کاربران

دیدگاهتان را بنویسید