IEC TC 36 , استانداردهای عایق الکتریکال

IEC TC 36 (Standards Set) : Insulators

دانلود پکیج کامل استانداردهای بین المللی IEC برای عایق ها در صنعت برق و الکتریکال
(مجموعه استانداردهای کمیته فنی IEC TC 36)

دامنه کاربرد پکیج IEC TC 36 : استاندارد سازی عایق ها برای سیستم ها و تجهیزات فشار قوی برق شامل بوشینگ ها، عایق های خطوط هوایی کابل برق و پست ها و کوپلینگ های آنها می باشد.

لیست استانداردهای این مجموعه:

1. IEC 60120:2020 Ball and socket couplings of string insulator units – Dimensions
2. IEC 60168:1994+AMD1 + AMD2:2000   Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
3. IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
4. IEC 60305:1995  Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for AC systems – Characteristics of insulator units of the cap and pin type
5. IEC 60372:2003  Locking devices for ball and socket couplings of string insulator units – Dimensions and tests
6. IEC 60383-1:1993  Insulators for overhead lines with a nominal voltage above 1000 V – Part 1: Ceramic or glass insulator units for a.c. systems – Definitions, test methods and acceptance criteria
7. IEC 60383-2:1993 Insulators for overhead lines with a nominal voltage above 1000 V – Part 2: Insulator strings and insulator sets for a.c. systems – Definitions, test methods and acceptance criteria
8. IEC 60433:1998  Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic insulators for AC systems – Characteristics of insulator units of the long rod type
9. IEC 60437:1997 Radio interference test on high-voltage insulators
10. IEC 60471:2020 Clevis and tongue couplings of string insulator units – Dimensions
11. IEC 60507:2013 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
12. IEC TR 60575:1977 Thermal-mechanical performance test and mechanical performance test on string insulator units
13. IEC 60660:1999 Insulators – Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
14. IEC 60720:1981 Characteristics of line post insulators
15. IEC TR 60797:1984 Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric
16. IEC TS 60815-1:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 1: Definitions, information and general principles
17. IEC TS 60815-2:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 2: Ceramic and glass insulators for a.c. systems
18. IEC TS 60815-3:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 3: Polymer insulators for a.c. systems
19. IEC TS 60815-4:2016 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions – Part 4: Insulators for d.c. systems
20. IEC 61109:2008 Insulators for overhead lines – Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
21. IEC 61211:2004 Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V – Impulse puncture testing in air
22. IEC TS 61245:2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems
23. IEC 61325:1995 Insulators for overhead lines with a nominal voltage above 1000 V – Ceramic or glass insulator units for d.c. systems – Definitions, test methods and acceptance criteria
24. IEC 61462:2007    Composite hollow insulators – Pressurized and unpressurized insulators for use in electrical equipment with AC rated voltage greater than 1 000 V AC and D.C. voltage greater than 1500V – Definitions, test methods, acceptance criteria and design recommendations
25. IEC 61466-1:2016 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 1: Standard strength and end fittings
26. IEC 61466-2:1998 + AMD1:2002 Amendment 1 – Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 2: Dimensional and electrical characteristics
27. IEC 61466-2:1998/AMD2:2018 Amendment 2 – Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V – Part 2: Dimensional and electrical characteristics
28. IEC 61467:2008 Insulators for overhead lines – Insulator strings and sets for lines with a nominal voltage greater than 1 000 V – AC power arc tests
29. IEC 61952:2008 Insulators for overhead lines – Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V – Definitions, test methods and acceptance criteria
30. IEC 61952-1:2019 Insulators for overhead lines – Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V – Part 1: definitions, end fittings and designations
31. IEC TS 62073:2016 Guidance on the measurement of hydrophobicity of insulator surfaces
32. IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
33. IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria
34. IEC 62223:2009 Insulators – Glossary of terms and definitions
35. IEC 62231:2006 Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV – Definitions, test methods and acceptance criteria
36. IEC 62231-1:2015 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV – Part 1: Dimensional, mechanical and electrical characteristics
37. IEC TS 62371:2008 Characteristics of hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
38. IEC TR 62662:2010 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials
39. IEC TR 62730:2012 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test
40. IEC 62772:2016  Composite hollow core station post insulators with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V – Definitions, test methods and acceptance criteria
41. IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications – Definitions, test methods and acceptance criteria