CEN TC 104 , استانداردهای بتن و محصولات بتنی

دانلود استانداردهای BS EN ISO

CEN TC 104 (Concrete and related products)

دانلود پکیج استانداردهای اروپایی BS EN برای محصولات بتن و انواع الزامات مربوطه به مبحث بتن 
(مجموعه استانداردهای کمیته فنی CEN TC 104)

لیست استانداردهای این مجموعه:

  1. CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete – Guidelines for the application of EN 450-2
  2. CEN/TR 15868:2018 Survey on provisions valid in the place of use used in conjunction with the European concrete standard and developing practice
  3. CEN/TR 16349:2012 Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
  4. CEN/TR 16369:2012 Use of control charts in the production of concrete
  5. CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007 – Fly ash for concrete
  6. CEN/TR 16563:2013 Principles of the equivalent durability procedure
  7. CEN/TR 16639:2014 Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept
  8. CEN/TR 17086:2020 Further guidance on the application of EN 13791:2019 and background to the provisions
  9. CEN/TR 17310:2019 Carbonation and CO2 uptake in concrete
  10. CEN/TS 14754-1:2007 Curing compounds – Test methods – Part 1: Determination of water retention efficiency of common curing compounds
  11. EN 1008:2002 Mixing water for concrete – Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
  12. EN 12188:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of adhesion steel-to-steel for characterisation of structural bonding agents
  13. EN 12189:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of open time
  14. EN 12190:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of compressive strength of repair mortar
  15. EN 12192-1:2002 Products and systems for the protection and repair of concrete structures – Granulometry analysis – Part 1: Test method for dry components of premixed mortar
  16. EN 12192-2:1999 Products and systems for the protection and repair of concrete structures – Granulometry analysis – Part 2: Test method for fillers for polymer bonding agents
  17. EN 12350-1:2019 Testing fresh concrete – Part 1: Sampling and common apparatus
  18. EN 12350-10:2010 Testing fresh concrete – Part 10: Self-compacting concrete – L box test
  19. EN 12350-11:2010 Testing fresh concrete – Part 11: Self-compacting concrete – Sieve segregation test
  20. EN 12350-12:2010 Testing fresh concrete – Part 12: Self-compacting concrete – J-ring test
  21. EN 12350-2:2019 Testing fresh concrete – Part 2: Slump test
  22. EN 12350-3:2019 Testing fresh concrete – Part 3: Vebe test
  23. EN 12350-4:2019 Testing fresh concrete – Part 4: Degree of compactability
  24. EN 12350-5:2019 Testing fresh concrete – Part 5: Flow table test
  25. EN 12350-6:2019 Testing fresh concrete – Part 6: Density
  26. EN 12350-7:2019 Testing fresh concrete – Part 7: Air content – Pressure methods
  27. EN 12350-7:2019 Testing fresh concrete – Part 7: Air content – Pressure methods
  28. EN 12350-8:2019 Testing fresh concrete – Part 8: Self-compacting concrete – Slump-flow test
  29. EN 12350-9:2010 Testing fresh concrete – Part 9: Self-compacting concrete – V-funnel test
  30. EN 12390-1:2021 Testing hardened concrete – Part 1: Shape, dimensions and other requirements for specimens and moulds
  31. EN 12390-10:2018 Testing hardened concrete – Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
  32. EN 12390-11:2015 Testing hardened concrete – Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
  33. EN 12390-12:2020 Testing hardened concrete – Part 12: Determination of the carbonation resistance of concrete – Accelerated carbonation method
  34. EN 12390-13:2013 R-2019 Testing hardened concrete – Part 13: Determination of secant modulus of elasticity in compression
  35. EN 12390-14:2018 Testing hardened concrete – Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process
  36. EN 12390-15:2019 Testing hardened concrete – Part 15: Adiabatic method for the determination of heat released by concrete during its hardening process
  37. EN 12390-16:2019 Testing hardened concrete – Part 16: Determination of the shrinkage of concrete
  38. EN 12390-17:2019 Testing hardened concrete – Part 17: Determination of creep of concrete in compression
  39. EN 12390-18:2021 Testing hardened concrete – Part 18: Determination of the chloride migration coefficient
  40. EN 12390-2:2019 Testing hardened concrete – Part 2: Making and curing specimens for strength tests
  41. EN 12390-3:2019 Testing hardened concrete – Part 3: Compressive strength of test specimens
  42. EN 12390-4:2019 Testing hardened concrete – Part 4: Compressive strength – Specification for testing machines
  43. EN 12390-5:2019 Testing hardened concrete – Part 5: Flexural strength of test specimens
  44. EN 12390-6:2009 Testing hardened concrete – Part 6: Tensile splitting strength of test specimens
  45. EN 12390-7:2019 Testing hardened concrete – Part 7: Density of hardened concrete
  46. EN 12390-7:2019/AC:2020 Testing hardened concrete – Part 7: Density of hardened concrete
  47. EN 12390-8:2019 Testing hardened concrete – Part 8: Depth of penetration of water under pressure
  48. EN 12504-1:2019 Testing concrete in structures – Part 1: Cored specimens – Taking, examining and testing in compression
  49. EN 12504-1:2019 Testing concrete in structures – Part 1: Cored specimens – Taking, examining and testing in compression
  50. EN 12504-2:2019 Testing concrete in structures – Part 2: Non-destructive testing – Determination of rebound number
  51. EN 12504-3:2005 Testing concrete in structures – Part 3: Determination of pull-out force
  52. EN 12504-4:2019 Testing concrete in structures – Part 4: Determination of ultrasonic pulse velocity
  53. EN 12614:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of glass transition temperatures of polymers
  54. EN 12615:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of slant shear strength
  55. EN 12617-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)
  56. EN 12617-2:2004 Products and systems for the protection and repair of concrete structures – Test methods – Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
  57. EN 12617-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Part 3: Determination of early age linear shrinkage for structural bonding agents
  58. EN 12617-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Part 4: Determination of shrinkage and expansion
  59. EN 12618-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Part 1: Adhesion and elongation capacity of injection products with limited ductility
  60. EN 12618-2:2004 Products and systems for the protection and repair of concrete structures – Test methods – Part 2: Determination of the adhesion of injection products, with our without thermal cycling – Adhesion by tensile bond strength
  61. EN 12618-3:2004 Products and systems for the protection and repair of concrete structures – Test methods – Part 3: Determination of the adhesion of injection products, with or without thermal cycling – Slant shear method
  62. EN 12636:1999 Products and systems for the protection and repair of concrete structures – Test methods – Determination of adhesion concrete to concrete
  63. EN 12637-1:2004 Products and systems for the protection and repair of concrete structures – Test methods – Compatibility of injection products – Part 1: Compatibility with concrete
  64. EN 12637-3:2003 Products and systems for the protection and repair of concrete structures – Test methods – Compatibility of injection products – Part 3: Effect of injection products on elastomers
  65. EN 13057:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of resistance of capillary absorption
  66. EN 13062:2003 Products and systems for the protection and repair of concrete structure – Test method – Determination of thixotropy of products for protection of reinforcement
  67. EN 13263-1:2005+A1:2009 Silica fume for concrete – Part 1: Definitions, requirements and conformity criteria
  68. EN 13263-2:2005+A1:2009 Silica fume for concrete – Part 2: Conformity evaluation
  69. EN 13294:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of stiffening time
  70. EN 13295:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of resistance to carbonation
  71. EN 13395-1:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 1: Test for flow of thixotropic mortars
  72. EN 13395-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 2: Test for flow of grout or mortar
  73. EN 13395-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 3: Test for flow of repair concrete
  74. EN 13395-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of workability – Part 4: Application of repair mortar overhead
  75. EN 13396:2004 Products and systems for the protection and repair of concrete structures – Test methods – Measurement of chloride ion ingress
  76. EN 13412:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of modulus of elasticity in compression
  77. EN 13529:2003 Products and systems for the protection and repair of concrete structures – Test methods – Resistance to severe chemical attack
  78. EN 13577:2007 Chemical attack on concrete – Determination of aggressive carbon dioxide content in water
  79. EN 13578:2003 Products and systems for the protection and repair of concrete structure – Test Method – Compatibility on wet concrete
  80. EN 13579:2002 Products and systems for the protection and repair of concrete structures – Test methods – Drying test for hydrophobic impregnation
  81. EN 13580:2002 Products and systems for the protection and repair of concrete structures – Test Methods – Water absorption and resistance to alkali for hydrophobic impregnations
  82. EN 13581:2002 Products and systems for the protection and repair of concrete structures – Test method – Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
  83. EN 13584:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of creep in compression for repair products
  84. EN 13670:2009 Execution of concrete structures
  85. EN 13687-1:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 1: Freeze-thaw cycling with de-icing salt immersion
  86. EN 13687-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 2: Thunder-shower cycling (thermal shock)
  87. EN 13687-3:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 3: Thermal cycling without de-icing salt impact
  88. EN 13687-4:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 4: Dry thermal cycling
  89. EN 13687-5:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of thermal compatibility – Part 5: Resistance to temperature shock
  90. EN 13733:2002 Products and systems for the protection and repair of concrete structures – Tests methods – Determination of the durability of structural bonding agents
  91. EN 13791:2019 Assessment of in-situ compressive strength in structures and precast concrete components
  92. EN 13894-1:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of fatigue under dynamic loading – Part 1: During cure
  93. EN 13894-2:2002 Products and systems for the protection and repair of concrete structures – Test methods – Determination of fatigue under dynamic loading – Part 2: After hardening
  94. EN 14068:2003 Products and systems for the protection and repair of concrete structures – Test methods – Determination of watertightness of injected cracks without movement in concrete
  95. EN 14117:2004 Products systems for the protection and repair of concrete structures – Test methods – Determination of time of efflux of cementitious injection products
  96. EN 14406:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the expansion ratio and expansion evolution
  97. EN 14487-1:2005 Sprayed concrete – Part 1: Definitions, specifications and conformity
  98. EN 14487-2:2006 Sprayed concrete – Part 2: Execution
  99. EN 14488-1:2005 Testing sprayed concrete – Sampling fresh and hardened concrete
  100. EN 14488-2:2006 Testing sprayed concrete – Part 2: Compressive strength of young sprayed concrete
  101. EN 14488-3:2006 Testing sprayed concrete – Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
  102. EN 14488-4:2005+A1:2008 Testing sprayed concrete – Part 4: Bond strength of cores by direct tension
  103. EN 14488-5:2006 Testing sprayed concrete – Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
  104. EN 14488-6:2006 Testing sprayed concrete – Part 6: Thickness of concrete on a substrate
  105. EN 14488-7:2006 Testing sprayed concrete – Part 7: Fibre content of fibre reinforced concrete
  106. EN 14497:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the filtration stability
  107. EN 14497:2004/AC:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the filtration stability
  108. EN 14498:2004 Products and systems for the protection and repair of concrete structures – Test methods – Volume and weight changes of injection products after air drying and water storage cycles
  109. EN 14629:2007 Products and systems for the protection and repair of concrete structures – Test methods – Determination of chloride content in hardened concrete
  110. EN 14630:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of carbonation depth in hardened concrete by the phenolphthalein method
  111. EN 14845-1:2007 Test methods for fibres in concrete – Part 1: Reference concretes
  112. EN 14845-2:2006 Test methods for fibres in concrete – Part 2: Effect on concrete
  113. EN 14889-1:2006 Fibres for concrete – Part 1: Steel fibres – Definitions, specifications and conformity
  114. EN 14889-2:2006 Fibres for concrete – Part 2: Polymer fibres – Definitions, specifications and conformity
  115. EN 1504-1:2005 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 1: Definitions
  116. EN 1504-10:2017 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 10: Site application of products and systems and quality control of the works
  117. EN 1504-2:2004 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 2: Surface protection systems for concrete
  118. EN 1504-3:2005 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 3: Structural and non-structural repair
  119. EN 1504-4:2004 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 4: Structural bonding
  120. EN 1504-5:2013 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 5: Concrete injection
  121. EN 1504-6:2006 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 6: Anchoring of reinforcing steel bar
  122. EN 1504-7:2006 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 7: Reinforcement corrosion protection
  123. EN 1504-8:2016 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and AVCP – Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)
  124. EN 1504-9:2008 Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – Part 9: General principles for the use of products and systems
  125. EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout – Part 1: Definitions, specifications and conformity criteria
  126. EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout – Part 2: Conformity evaluation
  127. EN 15183:2006 Products and systems for the protection and repair of concrete structures – Test methods – Corrosion protection test
  128. EN 15184:2006 Products and systems for the protection and repair of concrete structures – Test methods – Shear adhesion of coated steel to concrete (pull-out test)
  129. EN 1542:1999 Products and systems for the protection and repair of concrete structures – Test methods – Measurement of bond strength by pull-off
  130. EN 1543:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of tensile strength development for polymers
  131. EN 1544:2006 Products and systems for the protection and repair of concrete structures – Test methods – Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars
  132. EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann-Gully
  133. EN 16622:2015 Silica-calcium fume for concrete – Definitions, requirements and conformity criteria
  134. EN 1766:2017 Products and systems for the protection and repair of concrete structures – Test methods – Reference concretes for testing
  135. EN 1767:1999 Products and systems for the protection and repair of concrete structures – Test methods – Infrared analysis
  136. EN 1770:1998 Products and systems for the protection and repair of concrete structures – Test methods – Determination of the coefficient of thermal expansion
  137. EN 1771:2004 Products and systems for the protection and repair of concrete structures – Test methods – Determination of injectability and splitting test
  138. EN 1771:2004/AC:2005 Products and systems for the protection and repair of concrete structures – Test methods – Determination of injectability and splitting test
  139. EN 1799:1998 Products and systems for the protection and repair of concrete structures – Test methods – Tests to measure the suitability of structural bonding agents for application to concrete surface
  140. EN 1877-1:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reactive functions related to epoxy resins – Part 1: Determination of epoxy equivalent
  141. EN 1877-2:2000 Products and systems for the protection and repair of concrete structures – Test methods – Reactive functions related to epoxy resins – Part 2: Determination of amine functions using the total basicity number
  142. EN 1881:2006 Products and systems for the protection and repair of concrete structures – Test methods – Testing of anchoring products by the pull-out method
  143. EN 206:2013+A2:2021 Concrete – Specification, performance, production and conformity
  144. EN 445:2007 Grout for prestressing tendons – Test methods
  145. EN 446:2007 Grout for prestressing tendons – Grouting procedures
  146. EN 447:2007 Grout for prestressing tendons – Basic requirements
  147. EN 450-1:2012 Fly ash for concrete – Part 1: Definition, specifications and conformity criteria
  148. EN 450-2:2005 Fly ash for concrete – Part 2: Conformity evaluation
  149. EN 451-1:2017 Method of testing fly ash – Part 1: Determination of free calcium oxide content
  150. EN 451-2:2017 Method of testing fly ash – Part 2: Determination of fineness by wet sieving
  151. EN 480-1:2014 Admixtures for concrete, mortar and grout – Test methods – Part 1: Reference concrete and reference mortar for testing
  152. EN 480-10:2009 Admixtures for concrete, mortar and grout – Test methods – Part 10: Determination of water soluble chloride content
  153. EN 480-11:2005 Admixtures for concrete, mortar and grout – Test methods – Part 11: Determination of air void characteristics in hardened concrete
  154. EN 480-12:2005 Admixtures for concrete, mortar and grout – Test methods – Part 12: Determination of the alkali content of admixtures
  155. EN 480-13:2015 Admixtures for concrete, mortar and grout – Test methods – Part 13: Reference masonry mortar for testing mortar admixtures
  156. EN 480-14:2006 Admixtures for concrete, mortar and grout – Test methods – Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
  157. EN 480-15:2013 Admixtures for concrete, mortar and grout – Test methods – Part 15: Reference concrete and method for testing viscosity modifying admixtures
  158. EN 480-2:2006 Admixtures for concrete, mortar and grout – Test methods – Part 2: Determination of setting time
  159. EN 480-4:2005 Admixtures for concrete, mortar and grout – Test methods – Part 4: Determination of bleeding of concrete
  160. EN 480-5:2005 Admixtures for concrete, mortar and grout – Test methods – Part 5: Determination of capillary absorption
  161. EN 480-6:2005 Admixtures for concrete, mortar and grout – Test methods – Part 6: Infrared analysis
  162. EN 480-8:2012 Admixtures for concrete, mortar and grout – Test methods – Part 8: Determination of the conventional dry material content
  163. EN 523:2003 Steel strip sheaths for prestressing tendons – Terminology, requirements, quality control
  164. EN 524-1:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 1: Determination of shape and dimensions
  165. EN 524-2:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 2: Determination of flexural behaviour
  166. EN 524-3:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 3: To-and-fro bending test
  167. EN 524-4:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 4: Determination of lateral load resistance
  168. EN 524-5:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 5: Determination of tensile load resistance
  169. EN 524-6:1997 Steel strip sheaths for prestressing tendons – Test methods – Part 6: Determination of leaktightness (Determination of water loss)
  170. EN 934-1:2008 Admixtures for concrete, mortar and grout – Part 1: Common requirements
  171. EN 934-2:2009+A1:2012 Admixtures for concrete, mortar and grout – Part 2: Concrete admixtures – Definitions, requirements, conformity, marking and labelling
  172. EN 934-3:2009+A1:2012 Admixtures for concrete, mortar and grout – Part 3: Admixtures for masonry mortar – Definitions, requirements, conformity and marking and labelling
  173. EN 934-4:2009 Admixtures for concrete, mortar and grout – Part 4: Admixtures for grout for prestressing tendons – Definitions, requirements, conformity, marking and labelling
  174. EN 934-5:2007 Admixtures for concrete, mortar and grout – Part 5: Admixtures for sprayed concrete – Definitions, requirements, conformity, marking and labelling
  175. EN 934-6:2019 Admixtures for concrete, mortar and grout – Part 6: Sampling, assessment and verification of the constancy of performance

 

مشخصات فایل
  • فرمت فایل ها : PDF
  • زبان نگارش: انگلیسی
  • آخرین ویرایشهای فعال تا : 2022
  • کمیته فنی: CEN TC 104
مجموعه استانداردهاASME پکیج استانداردهای مدیریت کیفیت

دیدگاهتان را بنویسید

دکمه بازگشت به بالا